The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from a wall or partition that is 54 inches (1372 mm) minimum in length....
Search Results "Maximum Extent Practicable"
-
11B-809.10.7.2 Location
-
403.5.3 Passing Spaces
An accessible route with a clear width less than 60 inches (1525 mm) shall provide passing spaces at intervals of 200 feet (61 m) maximum....
-
1009.5.4 Transfer Steps
Transfer step height shall be 8 inches (205 mm) maximum....
-
403.5.1 Clear Width
EXCEPTION: The clear width shall be permitted to be reduced to 32 inches (815 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated by...
-
1009.2.1 Pool Lift Location
Where multiple pool lift locations are provided, no more than one pool lift shall be required to be located in an area where the water level is 48 inches (1220 mm) maximum....
-
Expert Report of John Rife Torkelson, theACCESSpartnership, L.P. (August 8, 2018)
Parking: The surface slope of the designated accessible van space exceeds the maximum slope allowed of 1:48 (1991 ADA Stds 4.6.3; 2010 ADA Stds 502.4)....
-
1. What are the basic requirements of ADA Title II and Section 504?
benefit from the programs, services and activities of the entity;36 they are also prohibited from using methods of program administration, which includes written rules as well as agency practices...
-
ADA Title III: Public Accommodations
They also must comply with specific requirements related to architectural standards for new and altered buildings; reasonable modifications to policies, practices, and procedures; effective...
-
Section 36.306 Personal Devices and Services (Section-By-Section Analysis and Response to Comments)
that will explicitly apply not just to auxiliary aids and services and alternatives to barrier removal, but across-the-board to include such relevant areas as modifications in policies, practices...
-
National Consortium on Deaf-Blindness
NCDB works to improve the quality of life for children who are deaf-blind and their families by: Creating visibility and direction for identified priorities through a range of practices...
-
3. Stowage Space for Wheelchairs
It would not be practical to require spaces that can handle every sort of device....
-
1.2 Background
tactile pavements have been used in Japan since the 1960s, and in England there are currently seven different types of tactile paving patterns used. 11 12 13 Persons interested in the practices...
-
Kawneer North America 190/350/500 Standard Entrances
strength for buildings experiencing heavy traffic conditions General Heights vary to 10 feet; widths range from approximately 3 to 4 feet Door frame face widths range to a maximum...
-
Guardian Barrier-Free WideArea™ Eye/Face Wash GBF1724
Profile of unit is “flattened” to comply with maximum height and knee clearance requirements....
-
Stanley Magic-Force™ Full or Low Energy Swing Door Operator
STANLEY Magic-Force™ operator allows for maximum flexibility at design phase and upon installation because it is field adjustable to work as both full energy (motion activated) or low energy...
-
Toilet Paper Dispensers
The provisions for toilet paper dispensers at section 604.7 of the 2010 Standards require the dispenser to be located seven inches minimum and nine inches maximum in front of the water closet...
-
11B-703.3.1 Dimensions and capitalization
TABLE 11B-703.3.1 BRAILLE DIMENSIONS MEASUREMENT RANGE MINIMUM IN INCHES MAXIMUM IN INCHES Dot base diameter...
-
Features of Accessible Parking Spaces
Access aisle width is at least 60 inches, must be at the same level and the same length as the adjacent parking space(s) it serves, maximum slope in all directions is 1:48, and access aisle...
-
11B-703.3.1 Dimensions and capitalization
TABLE 11B-703.3.1 BRAILLE DIMENSIONS MEASUREMENT RANGE MINIMUM IN INCHES MAXIMUM IN INCHES Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm)...
-
11B-703.3.1 Dimensions and capitalization
TABLE 11B-703.3.1 BRAILLE DIMENSIONS MEASUREMENT RANGE MINIMUM IN INCHES MAXIMUM IN INCHES Dot base diameter...
-
704.8 Allowable area of openings
The maximum area of unprotected or protected openings permitted in an exterior wall in any story shall not exceed the values set forth in Table 704.8....
-
405.2 Slope (Exception 2), 405.6 Rise (Exception)
The running slope of ramp runs must not be steeper than 1:12 and any ramp rise must be 30 inches maximum....
-
2.2.3 Functional Reach
Use of the electromechanical probe required manually digitizing the 3-D location of the maximum reach point after the cylinder was positioned (Figure 2‒3)....
-
4.3.8 Operating forces
For other types of operable parts, the upper limit for operating force should be retained at a maximum of 5 lbf (22 N) to accommodate 95% of the sample....
