The Act requires that, to the maximum extent feasible, facilities must be accessible to, and usable by, individuals with disabilities....
Search Results "Maximum Dimension"
-
§35.133 Maintenance of Accessible Features
-
M301.2.3 Transfer Sides
Guidance from IEC 60601-2-52 does establish the maximum vertical obstruction of being not less than 1" below the top of the transfer surface....
-
Key Study findings:
Of the participants who attempted and were successful with performing two-step transfers, the 50th percentile could attain a 7 inch vertical height difference which is below the maximum...
-
Protocol A Heights Obtained
The upper 95th percentile transfer heights were 3" higher for the NDVWSC than the HERL group for the maximum height transfer....
-
1. Sloped Surfaces
The maximum running slope generally allowed for ramps is 1:12 (8.33% or 4.76 degrees). Cross slope is the slope or grade of a surface perpendicular to the running slope....
-
§35.133 Maintenance of accessible features (Section-by-Section Analysis)
The Act requires that, to the maximum extent feasible, facilities must be accessible to, and usable by, individuals with disabilities....
-
1017.4 Passing Spaces
This section requires passing spaces to be provided at intervals of 1000 feet maximum where the clear tread width of trails is less than 60 inches....
-
Section 36.211 Maintenance of Accessible Features (Section-By-Section Analysis and Response to Comments)
The Act requires that, to the maximum extent feasible, facilities must be accessible to, and usable by, individuals with disabilities....
-
11B-406.5.3 Landings
The slope of the landing in all directions shall be 1:48 maximum. [2010 ADA Standards] 406.4 Landings. Landings shall be provided at the tops of curb ramps....
-
232.2.1 Cells with Mobility Features
cells other than those where alterations are originally planned), provided that each substitute cell: (i) is located within the same prison site; (ii) Is integrated with other cells to the maximum...
-
[2010 ADAS] 105.2.2 ASME
provisions for escalators require that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum...
-
Ramps M303:3.3, 3.3.1, 3.3.2
*The rise of >1 ½ to 2 ½ inches - 1:8 slope is from section 405.2 Maximum Ramp Slope and Rise for Existing Sites, Buildings, and Facilities - [A steeper ramp for a limited rise is allowable...
-
Where must the wheelchair symbol be posted?
trails have been evaluated for accessibility, post the following information in addition to the standard message with the trail name, number, destination, and distance: Typical and maximum...
-
[2010 ADAS] 105.2.2 ASME
provisions for escalators require that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum...
-
2. Follow the Accessibility Standards for Play Areas
provided where the restricted accessible route exceeds 30 feet in length; or 2) the clear width of accessible routes shall be permitted to be 36 inches minimum for a distance of 60 inches maximum...
-
Sections 35.108(a)(2) and 36.105(a)(2) Definition of ‘‘disability’’—Rules of Construction
the ADA to require that the definition of ‘‘disability’’ be interpreted in conformance with several specific directives and an overarching mandate to ensure ‘‘broad coverage . . . to the maximum...
-
Section 37.139 Plan Contents
This section and §37.139 provide for a maximum phase-in period of five years, with an assumed one-year phase-in for all paratransit programs....
-
Panda S.66 Solid Wood Folding Door System
System Overview: Consists of engineered wood core frames that run along a single track for minimum obstruction and maximum view....
-
AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
Secure mounting plate to wall surface at specified location with proper anchors (snugly) until proper centerline dimension is achieved....
-
AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
Secure mounting plate to wall surface at specified location with proper anchors (snugly) until proper centerline dimension is achieved....
-
Healthcraft Invisia ADA Serenaseat™ Folding Shower Seat
Product shall comply with ADA Guidelines, specifically the dimensions and structural strength of the shower seat. ...
-
Salsbury Industries Designer Wood Locker Single Tier 3 Wide
lift up handle and recessed hasp for added security Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Compartment Dimension...
-
Salsbury Industries Designer Wood Locker Single Tier 1 Wide
lift up handle and recessed hasp for added security Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Compartment Dimensions...
-
Stanley Access Technologies Dura-Care 7200 Manual Sliding Door
Available TYPICAL WIDTH: 2-Panel | OPTION: 84" TO 108"; Clear Door Opening: 2-Panel (Standard) 35 1/4" to 47 1/4" HEADER SIZE: 4" BREAKOUT: Sliding Panel Breakout, Any Position JAMB DIMENSION...
