Seated people use the walls of 36 in by 36 in (915 mm by 915 mm) showers for back support....
Search Results "Seat Location"
-
A4.21.1 GENERAL
-
§ 37.103(d) Vans with a capacity of fewer than 8 persons
If the entity operates either a fixed route or demand responsive system, and purchases or leases a new van with a seating capacity of fewer than eight persons including the driver (the solicitation...
-
11B-704.2.1 Clear floor or ground space
The clear floor or ground space shall not be obstructed by bases, enclosures, or seats. [2010 ADAS] Advisory 704.2.1 Clear Floor or Ground Space....
-
11B-802.1.2 Width
It should be noted that although side access to the wheelchair space is allowed, fixed companion seating also must be provided adjacent to each wheelchair space.◼...
-
§ 38.179(a)
For purposes of determining applicability of 49 CFR 37.101, 37.103, or 37.105 the capacity of such a vehicle or “train” shall consist of the total combined seating capacity of all units,...
-
11B-216.8.1 Geometric symbols
Exceptions: Geometric symbols shall not be required at entrances to toilet and bathing rooms located within private or semi-private rooms or spaces....
-
11B-707.5.2 Receipts
Exceptions: Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible....
-
11B-217.4.1 Bank requirement
[2010 ADA Standards] EXCEPTION: TTYs shall not be required at banks of telephones located within 200 feet (61 m) of, and on the same floor as, a bank containing a public TTY....
-
11B-1009.3.2 Submerged depth
Where landings are required by Section 11B-405.7, at least one landing shall be located 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Control buttons shall be located no higher than 48 inches (1219 mm) above the ground surface adjacent to the pole....
-
11B-1009.3.2 Submerged depth
Where landings are required by Section 11B-405.7, at least one landing shall be located 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Control buttons shall be located no higher than 48 inches (1219 mm) above the ground surface adjacent to the pole....
-
11B-216.8.1 Geometric symbols
Exceptions: Geometric symbols shall not be required at entrances to toilet and bathing rooms located within private or semi-private rooms or spaces....
-
11B-217.4.1 Bank requirement
[2010 ADA Standards] EXCEPTION: TTYs shall not be required at banks of telephones located within 200 feet (61 m) of, and on the same floor as, a bank containing a public TTY....
-
11B-707.5.2 Receipts
Exceptions: Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible....
-
Providing Auxiliary Aids and Services
For help in locating service providers, call a local Center for Independent Living (CIL) or regional Disability and Business Technical Assistance Center (DBTAC). ...
-
904.2 Approach
All portions of counters required to comply with 904 shall be located adjacent to a walking surface complying with 403. Advisory 904.2 Approach....
-
5.9.1 Standing Supports In Reference To Mammography Equipment
To be useful, positioning supports must be shaped for grasping, positioned within reach range of all users, and be 12 inches long minimum when located on the moving C-arm or 18 inches long...
-
4.3.11.1(2)
(2) A portion of an exterior exit balcony located immediately adjacent to an exit stairway when the balcony complies with local requirements for exterior exit balconies....
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
904.2 Approach
All portions of counters required to comply with 904 shall be located adjacent to a walking surface complying with 403. Advisory 904.2 Approach....
-
611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor....
-
407.2.1.1 Height
Call buttons and keypads shall be located within one of the reach ranges specified in 308, measured to the centerline of the highest operable part....
-
810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with 703.2 and shall be placed in uniform locations to the maximum extent practicable....