Realtime Captioning converts the spoken word into instant text and has quickly become the new standard for the deaf or hearing-impaired community and for institutions seeking compliance...
Search Results "Open Movie Captioning"
-
QuickCaption
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...
-
§ 36.303(g)(4)(ii)
comply with the requirements in paragraph (g)(4)(i) of this section by using the existing assistive listening receivers that the public accommodation is already required to provide at its movie...
-
11B-604.8.1.1.2 Maneuvering space with side-opening door
In a wheelchair accessible compartment with a door located in the side wall or partition, either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide and 60 inches (1524...
-
E. Door Pressure
(1) Defendants will perform door force checks on all public access doors and will adjust or modify as necessary to ensure that they do not require more than five (5) pounds of force to open...
-
§382.51(a)(7)
(7) You must replace any televisions and other audio-visual displays providing passengers with safety briefings, information, or entertainment that do not have high-contrast captioning capability...
-
Auxiliary aids and services: captioning and video interpreting services.
In addition, the Department is discussing in its preamble to § 36.303 options for adding captioning and narrative description that may eventually result in proposed textual changes. ...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
EduCAPTION
EduCAPTION is a leader in providing Broadcast Captioning Services and CART Services [Communication Access Realtime Translation] for the benefit of deaf and hard-of-hearing individuals. ...
-
Is automation of doors required?
Automation of doors is not required by the Standards, but it is highly recommended for entrance doors where the opening force is significant....
-
In-Flight Audio and Video Services
b), only requires that U.S. carriers make safety briefings on the aircraft that are presented by video accessible to persons who are deaf or hard of hearing, and it exempts cases where open...
-
A4.13.11 Door Opening Force
Forces for pushing or pulling doors open are measured with a push-pull scale under the following conditions:...
-
A4.13.11 DOOR OPENING FORCE
Forces for pushing or pulling doors open are measured with a push-pull scale under the following conditions:...
-
Surface, Slope, and Openings [1011.2.2, 1011.2.3, and 1011.2.4]
Openings in the surface of the clear ground space must be small enough so that a sphere more than one-half inch in diameter cannot pass through....
-
4.7.5 Openings
Openings in surface of the clear floor or ground spaces required by section 2.0 shall not allow passage of a sphere more than 1/2 inch (13 mm) in diameter....
-
4.13.11* DOOR OPENING FORCE
The maximum force for pushing or pulling open a door shall be as follows: (1) Fire doors shall have the minimum opening force allowable by the appropriate administrative authority....
-
Track Crossing
Section 810.10 addresses track crossings at transportation facilities. The proposed rule required route surfaces to be level with the rail top, but permitted a 2 ½ inch gap at the...
-
T402.11 Gaps
When ramps or bridgeplates are deployed for boarding and alighting, gaps between the ramp or bridgeplate surface and floor of non-rail vehicles shall not permit passage of a sphere...
-
4.13.11(2)(b)
(b) interior hinged doors: 5 lbf (22.2N)
-
A4.13.11(3) Application of force
(3) Application of force: Apply force gradually so that the applied force does not exceed the resistance of the door. In high-rise buildings, air-pressure differentials may require a...
-
A4.13.11(3) Application of force
(3) Application of force: Apply force gradually so that the applied force does not exceed the resistance of the door. In high-rise buildings, air-pressure differentials may...
