Guards shall be located along open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured...
Search Results "Cross-Aisle"
-
1015.2 Where required
-
227 Sales and Service
Requirements for check-out aisles have been revised to clarify access to check-out aisles serving different functions (227.2)....
-
§ 38.161 Moveable aisle armrests
A minimum of 50% of aisle seats, including all moveable or removable seats at wheelchair or mobility aide securement locations, shall have an armrest on the aisle side which can be...
-
11B-216.11 Check-out aisles
check-out aisle identification...
-
11B-216.11 Check-out aisles
check-out aisle identification...
-
11B-216.11 Check-out aisles
check-out aisle identification...
-
11B-503.3.3 Marking
Access aisles shall be marked with a painted borderline around their perimeter....
-
B3. Access Aisle
Is the area for the access aisle at least 5-feet wide and 20-feet long?...
-
7.4.5.2 Slope
The cross slope of a passing space shall not exceed 1:20 (5 percent) in any direction....
-
11B-503.3.3 Marking
Access aisles shall be marked with a painted borderline around their perimeter....
-
11B-503.3.3 Marking
Access aisles shall be marked with a painted borderline around their perimeter....
-
503.3.3 Marking
Access aisles shall be marked so as to discourage parking in them. Figure 503.3 Passenger Loading Zone Access Aisle...
-
503.3.3 Marking
Access aisles shall be marked so as to discourage parking in them. Figure 503.3 Passenger Loading Zone Access Aisle...
-
B2
Does each accessible parking space have its own, or share, an adjacent access aisle that is least 60 inches (5 feet) wide? [ADA Standards § 4.6.3] Yes No...
-
11B-502.2 Vehicle spaces
spaces shall be 108 inches (2743 mm) wide minimum and van parking spaces shall be 144 inches (3658 mm) wide minimum, shall be marked to define the width, and shall have an adjacent access aisle...
-
11B-502.2 Vehicle spaces
spaces shall be 108 inches (2743 mm) wide minimum and van parking spaces shall be 144 inches (3658 mm) wide minimum, shall be marked to define the width, and shall have an adjacent access aisle...
-
4.8.6 Cross Slope and Surfaces
The cross slope of ramp surfaces shall be no greater than 1:50. Ramp surfaces shall comply with 4.5....
-
4.8.6 CROSS SLOPE AND SURFACES
The cross slope of ramp surfaces shall be no greater than 1:50. Ramp surfaces shall comply with 4.5....
-
1018.2 Aisles in assembly spaces
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
1015.2 Where required
Guards shall be located along open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings, that are located more than 30 inches (762 mm) measured...
-
Handrail Clearance and Cross Section [§505.5, §505.7]
Handrail Clearance and Cross Section [§505.5, §505.7] Surface requirements and clearances facilitate a power grip along the length of handrails....
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....