The clear width between required handrails shall be 33 inches (840 mm) minimum and 38 inches (965 mm) maximum. EXCEPTIONS: 1....
Search Results "Character Width (VMS)"
Commonly Searched Documents
- 
    
  
  Handrails: ADA Standard Section 1009.3.3
  
- 
    
  
  A4.2.1(2) Space Requirements for Use of Walking Aids
  Although people who use walking aids can maneuver through clear width openings of 32 in (815 mm), they need 36 in (915 mm) wide passageways and walks for comfortable gaits.... 
- 
    
  
  A4.2.1(2) Space Requirements for Use of Walking Aids
  Although people who use walking aids can maneuver through clear width openings of 32 in (815 mm), they need 36 in (915 mm) wide passageways and walks for comfortable gaits.... 
- 
    
  
  Clear Width and Vertical Clearance of Doors and Gates [§404.2.3]
  Clear Width and Vertical Clearance of Doors and Gates [§404.2.3]... 
- 
    
  
  4.10.5 RAISED CHARACTERS ON HOISTWAY ENTRANCES
  The centerline of the characters shall be 60 in (1525 mm) from the floor. Such characters shall be 2 in (50 mm) high and shall comply with 4.30.... 
- 
    
  
  404.3.1 Clear Width
  404.3.1 Clear Width. Doorways shall provide a clear opening of 32 inches (815 mm) minimum in power-on and power-off mode.... 
- 
    
  
  3.3.10 90-Degree Turn 
  The width required for all participants to complete a 90-degree turn in our sample was much smaller than the UDI findings (Figure 3‒10), due to differences in the abilities of people or/... 
- 
    
  
  703.5 Visual Characters
  Visual characters shall comply with 703.5.... 
- 
    
  
  § 38.113(a) Clear width
  (a) Clear width.... 
- 
    
  
  Seat width and depth
  Seat width and depth: ADA-ABA currently requires a minimum entry point of 24 inches for transfer steps in play (Section 1008.3.1.1) [7] and pool areas (Section 1009.4.5) [7]. ... 
- 
    
  
  4.10.5 Raised and Braille Characters on Hoistway Entrances
  4.10.5 Raised and Braille Characters on Hoistway Entrances. All elevator hoistway entrances shall have raised and Braille floor designations provided on both jambs.... 
- 
    
  
  11B-703.5 Visual characters
  Visual characters shall comply with Section 11B-703.5.... 
- 
    
  
  11B-1009.2.5 Seat width
  The seat shall be 16 inches (406 mm) wide minimum. 
- 
    
  
  11B-1009.2.5 Seat width
  The seat shall be 16 inches (406 mm) wide minimum. 
- 
    
  
  11B-1009.2.5 Seat width
  The seat shall be 16 inches (406 mm) wide minimum. 
- 
    
  
  Door Clear Width
  Door Clear Width Open the door 90 degrees, measure from the face of the door to the edge of the door stop.... 
- 
    
  
  11B-406.5.2 Width
  The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum.... 
- 
    
  
  11B-406.5.2 Width
  The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum.... 
- 
    
  
  11B-406.5.2 Width
  The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum.... 
- 
    
  
  Clearances [§403.5]
  Clearances [§403.5] The minimum 36” continuous clear width of accessible routes can reduce to 32” at points, such as doorways, for a maximum distance of 24”.... 
- 
    
  
  Vehicle Spaces: ADA Standard Section 502.2
  Section 502.2 covers the current ADA Standards for vehicle spaces. 
- Figure 407.2.3.1 Floor Designations on Jambs of Elevator Hoistway Entrances – Drawing from the U.S. Access Board
- 
    
  
  703.2.6 Stroke Thickness
  Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character.... 
