The controls shall be interlocked with the car brakes, propulsion system, or door, or shall provide other appropriate mechanisms or systems, to ensure that the car cannot be moved when the...
Search Results "Car Dimension"
-
§ 38.125(b)(2)(i) Requirements
-
11B-408.4.1 Car dimensions and doors
Car doors shall be positioned at the narrow ends of cars and shall provide 32 inches (813 mm) minimum clear width....
-
11B-408.4.1 Car dimensions and doors
Car doors shall be positioned at the narrow ends of cars and shall provide 32 inches (813 mm) minimum clear width....
-
4.10.13* Car Position Indicators
In elevator cars, a visual car position indicator shall be provided above the car control panel or over the door to show the position of the elevator in the hoistway....
-
4.10.13* CAR POSITION INDICATORS
In elevator cars, a visual car position indicator shall be provided above the car control panel or over the door to show the position of the elevator in the hoistway....
-
11B-407.4.6.2.3 Illumination
Car control buttons shall be illuminated....
-
11B-407.4.6.2.3 Illumination
Car control buttons shall be illuminated....
-
11B-407.4.6.2.3 Illumination
Car control buttons shall be illuminated....
-
408.4.6 Car Controls
Elevator car controls shall comply with 407.4.6. Control panels shall be centered on a side wall....
-
408.4.6 Car Controls
Elevator car controls shall comply with 407.4.6. Control panels shall be centered on a side wall....
-
§ 38.125(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of car roll) in any direction between its unloaded position and its position when loaded...
-
11B-407.4.6.1 Location
In existing elevators, car control buttons with floor designations shall be permitted to be located 54 inches (1372 mm) maximum above the finish floor when a parallel approach is provided...
-
11B-407.4.6.1 Location
In existing elevators, car control buttons with floor designations shall be permitted to be located 54 inches (1372 mm) maximum above the finish floor when a parallel approach is provided...
-
407.4.7.1 Buttons
Car control buttons shall comply with 407.4.7.1....
-
407.4.7.1 Buttons
Car control buttons shall comply with 407.4.7.1....
-
11B-407.4.7.1 Buttons
Car control buttons shall comply with Section 11B-407.4.7.1....
-
11B-407.4.6.2.4 Operation
Car control buttons shall be activated by a mechanical motion that is detectable....
-
407.4.7.1 Buttons
Car control buttons shall comply with 407.4.7.1....
-
11B-407.4.6.2.4 Operation
Car control buttons shall be activated by a mechanical motion that is detectable....
-
11B-407.4.7.1 Buttons
Car control buttons shall comply with Section 11B-407.4.7.1....
-
11B-407.4.7.1 Buttons
Car control buttons shall comply with Section 11B-407.4.7.1....
-
11B-407.4.6.2.4 Operation
Car control buttons shall be activated by a mechanical motion that is detectable....
-
§ 37.89 Remanufacture of intercity and commuter rail cars and purchase or lease of remanufactured intercity and commuter rail cars
[See subsections ...]
-
§ 38.125(b)(7) Platform gaps
When the lift is at car floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally...