Error/Omission: Landing areas where ramps change direction (e.g., switchbacks or 90° turns) are too small....
Search Results "Aisle Ramp"
-
Error/Omission: Landing areas where ramps change direction (e.g., switchbacks or 90° turns) are too small.
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
Vehicle Spaces: ADA Standard Section 502.2
Section 502.2 covers the current ADA Standards for vehicle spaces.
-
EZ-ACCESS Transitions® Modular Entry Ramp
The Transitions® Modular Entry Ramp - is perfect for doorways to create a smooth and strong entry and exit....
-
Width: ADA Standard Section 503.3.1
Section 503.3.1 covers the current ADA Standards for the required width of access aisles at passenger loading zones.
-
11B-503.3.1 Width
Access aisles serving vehicle pull-up spaces shall be 60 inches (1524 mm) wide minimum....
-
11B-503.3.1 Width
Access aisles serving vehicle pull-up spaces shall be 60 inches (1524 mm) wide minimum....
-
A7.3 Check-out Aisles
Section 7.2 refers to counters without aisles; section 7.3 concerns check-out aisles....
-
How to Measure Access Aisles
In the final rule, the Board has clarified how parking spaces and access aisles are to be measured....
-
Curb Ramp
A short ramp cutting through a curb or built up to it....
-
Curb Ramp
A short ramp cutting through a curb or built up to it....
-
CURB RAMP
A short ramp cutting through a curb or built up to it....
-
1017.2 Aisles in assembly spaces
1017.2 Aisles in assembly spaces. Aisles and aisle accessways serving a room or space used for assembly purposes shall comply with Section 1028....
-
How are parking spaces and access aisles to be marked?
The ADA Standards do not specify the method or color of parking space and access aisle markings. State or local codes and regulations may specify such markings....
-
General: ADA Standard Section 227.1
Section 227.1: General Scoping Requirements for sales and service.
-
§ 38.95(c)(2) Ramp surface
(2) Ramp surface....
-
11B-227.1 General
Where provided, check-out aisles, sales counters, service counters, food service lines, queues, and waiting lines shall comply with Sections 11B-227 and 11B-904....
-
11B-227.1 General
Where provided, check-out aisles, sales counters, service counters, food service lines, queues, and waiting lines shall comply with Sections 11B-227 and 11B-904....
-
303.4 Ramps
Changes in level greater than ½ inch (13 mm) high shall be ramped, and shall comply with 405 or 406....
-
303.4 Ramps
Changes in level greater than 1/2 inch (13 mm) high shall be ramped, and shall comply with 405 or 406....
-
Curb Ramps and Blended Transitions (R309.4) (Section-by-Section Analysis)
Curb Ramps and Blended Transitions (R309.4) (Section-by-Section Analysis) Curb ramps or blended transitions must connect the access aisle serving each accessible on-street parking space...
-
Ramp
A walking surface that has a running slope steeper than 1:20.
-
Ramp
A walking surface which has a running slope greater than 1:20.
