Exceptions: Existing locks shall be permitted in any location at existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles...
Search Results "Signage Location"
Filters
Commonly Searched Documents
-
11B-404.2.7 Door and gate hardware
-
General: ADA Standard Section 223.1
Section 223.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for medical care and long-term care facilities.
-
11B-608.2.1 Transfer type shower compartments
compartments shall be permitted in transient lodging guest rooms, multibedroom housing units in undergraduate student housing and residential dwelling units; and shall not be permitted at other locations...
-
11B-240.2.2 Elevated play components
components are not considered ground level play components and do not count toward the requirements in Section 11B-240.2.1.2 regarding the number of ground level play components that must be located...
-
11B-502.5 Vertical clearance
Signs provided at entrances to parking facilities informing drivers of clearances and the location of van accessible parking spaces can provide useful customer assistance. ◼ ETA Editor's...
-
11B-233.3.4.2 Alterations to individual residential dwelling units
Sections 11B-233.3.1.1 and 11B-233.3.1.3 shall apply to the total number of residential dwelling units that are altered under a single contract, or are developed as a whole, whether or not located...
-
Accessible Entrance
If used, the buzzer or call bell must be located on an accessible route and mounted at an accessible height (generally not more than 48 inches above ground)....
-
‘‘Auxiliary aids and services.’’
Many commenters proposed additional examples, such as signage or mapping, audio description services, secondary auditory programs, telebraillers, and reading machines....
-
b) Accessibility
The proposed guidelines recognize that such facilities are located in topographies that vary, and as such, set different and more forgiving slope requirements than compared to those applicable...
-
B. Agreement of the Parties
Ellerbe shall design these facilities such that all or substantially all of the wheelchair seating locations in the facility provide persons with physical disabilities lines of sight that...
-
Access to Programs and Services in Existing Facilities
A social service agency located in an inaccessible facility can make arrangements to meet with an applicant or client with a mobility disability at an alternate location that is accessible...
-
Where must curb ramps be provided?
Curb ramps must be located to ensure a person with a mobility disability can travel from a sidewalk on one side of the street, over or through any curbs or traffic islands, to the sidewalk...
-
707.5.2 Receipts
Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible. 2....
-
1009.3.2 Submerged Depth
Where landings are required by 405.7, at least one landing shall be located 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
-
11B-707.5.2 Receipts
Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible. 2. ...
-
11B-217.4.1 Bank requirement
[2010 ADAS] EXCEPTION: TTYs shall not be required at banks of telephones located within 200 feet (61 m) of, and on the same floor as, a bank containing a public TTY. ...
-
307.4 Vertical Clearance
The leading edge of such guardrail or barrier shall be located 27 inches (685 mm) maximum above the finish floor or ground....
-
M302.4.1 Clearance in Base
Equipment components are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
M301.4.1 Clearance in Base
Components of diagnostic equipment are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
102 Dimensions for Adults and Children
In addition, technical requirements are also provided based on children’s dimensions and anthropometrics for drinking fountains, water closets and other elements located in toilet compartments...
-
1015.3 Viewing Space
Each distinct viewing location shall provide a viewing space adjacent to the clear ground space required by 1015.2 through which the point of interest is viewable....
-
Fixtures
None of these fixtures shall be located within the required water closet clearance except as allowed by the Exception to TAS 604.3.2....
-
Protrusions
Where a wheelchair space is located on a ride, nothing may protrude into the front of the wheelchair space 9 inches from the floor....
-
707.5.2 Receipts
Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible. 2....