The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
Search Results "Designated Aisle Seat (Assembly)"
-
1009.2.8 Submerged Depth
- Landscape Forms Inc. Multiplicity Bench Collection
-
Accessible Route to Parking
The Board has added a requirement that spaces and access aisles be designed so that parked vehicles "cannot obstruct the required clear width of adjacent accessible routes" (502.7)....
- Designing Sidewalks and Trails for Access, Part I of II: Review of Existing Guidelines and Practices
-
Benches
In saunas and steam rooms, this floor space may be obstructed by readily removable seats....
- Pilot Rock WUT and WUTH Picnic Table Using Recycled Plastic
- Pilot Rock WXT and WXTH Picnic Table Using Lumber
- Pilot Rock WXT and WXTH Picnic Table Using Expanded Steel
- Pilot Rock WUT and WUTH Picnic Table Using Lumber
- Pilot Rock WXT and WXTH Picnic Table Using Recycled Plastic
-
711.4.2 Membrane penetrations
Penetrations of membranes that are part of a fire-resistance-rated horizontal assembly shall comply with Section 711.4.1.1 or 711.4.1.2....
-
Pool Lifts: ADA Standard Section 1009.2
There are a variety of seats available on pool lifts ranging from sling seats to those that are preformed or molded....
-
Re: American Specialties 9014 Surface Mounted Horizontal Baby Changing Station
The design of the hand hold is completely sloped at about 45 degrees. My fingers slipped off unless I applied tremendous pinching force to operate....
-
11B-1002.5.4 Wheelchair storage space
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap...
-
11B-1002.5.4 Wheelchair storage space
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap...
-
11B-1002.5.4 Wheelchair storage space
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap...
-
A MINIMUM HIGHEST POINT STANDARD OF 19 INCHES IS CONSISTENT WITH EXISTING ACCESSIBILITY STANDARDS
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area.16 As...
-
II-6.2000 Choice of design standard: UFAS or ADAAG.
[See subsections ...]
-
Web Sites for Gate Designs and Suppliers in the United Kingdom
Scottish Natural Heritage http://www.snh.org.uk/publications/on-line/accessguide/gates.asp BTCV (British Trust for Conservation Volunteers)...
-
Panel 6: Interior Design (Gregory Knoop, Moderator)
[See subsections ...]
-
§27.13 Designation of responsible employee and adoption of complaint procedures.
[80 FR 13260, Mar. 13, 2015]
-
§8.53 Designation of responsible employee and adoption of grievance procedures.
[See subsections ...]
-
11B-213.1.1 Toilet facilities for designated user groups
Where separate toilet facilities are provided for the exclusive use of separate user groups, the toilet facilities serving each user group shall comply with Section 11B-213.
-
11B-213.1.1 Toilet facilities for designated user groups
Where separate toilet facilities are provided for the exclusive use of separate user groups, the toilet facilities serving each user group shall comply with Section 11B-213.