Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
Search Results "Clear Tread Width"
Filters
Commonly Searched Documents
-
404.2.10 Door and Gate Surfaces
-
Accessible Routes on the Playing Surface
The orientation of the length and the width have not been specified for added flexibility in design. Slopes on landings must be no more than 1:20 (5%)....
-
Alternative Golf Car Passage
A golf car passage can be substituted for all or part of the accessible route connecting elements within the boundary of the course and must be a minimum of 48 inches in width....
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
A 34-inch minimum width between the supports will allow for adequate elbow space for a user of a wheeled mobility device to push the wheels onto the platform and does not infringe on the...
-
2. Shared Use Paths
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
Non-Tactile Signage
TACTILE NON-TACTILE Character Proportion Font/ Style raised characters: · sans or "simple" serif · upper case only · width-to-height ratios for character...
-
3.3.13 360-Degree Turn
* indicates data plotted in the graph Figure 3-13. 360-degree turning width area: research findings versus the standards....
-
2. Shared Use Paths
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
2. Shared Use Paths
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
5. If there is a significant risk, reasonable accommodation must be considered
It was not clear that there was, in fact, a "high probability" of harm in this case, but the mechanic suggested an effective accommodation that enabled him to perform his job with little...
-
307.3 Post-Mounted Objects
Where a sign or other obstruction is mounted between posts or pylons and the clear distance between the posts or pylons is greater than 12 inches (305 mm), the lowest edge of such sign or...
-
611 Washing Machines and Clothes Dryers
Section 611 covers washing machines and clothes dryers and provides specifications for clear floor space, operable parts, and height. Comment....
-
606 Lavatories and Sinks
These specifications concern clear floor space requirements (606.2, Exception 3) and heights (606.3, Exception 2)....
-
Path of Travel
§36.403(e)(2) An accessible path of travel may consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors...
-
Accessible Entrances
The route to all accessible entrances must remain clear of snow, leaves, and debris....
-
J. Bedside Clearance
[ADA Stds. 9.2.2(1)] Yes __ No __ N/A __ Comments: _____________________________________ ... is there clear passage at the foot of each bed that is at least 36" wide so that persons...
-
Doorways [4.8.4]
Keeping the door swing clear of minimum landing dimensions is a good idea, especially at the bottom of ramps since people using wheelchairs may exit them with some force and speed....
-
Mirrors [4.19.6]
Clear floor space (30 by 48 inches minimum) for a forward approach located outside the swing of doors should be provided at full-length mirrors....
-
1.4.1. Deferral of Coverage for Auditoriums Showing Analog Movies Exclusively
The Department believes that it is prudent to delay further rulemaking with regard to analog movie theaters until it is clear whether, for example, there will be any movie theaters in the...
-
C. Defendants' Transaction Counter
But “[b]ecause of the cash registers and merchandise displays . . . defendant does not provide a 36-inch-long clear counter surface.” Id....