The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
Search Results "NFSI: National Floor Safety Institute"
-
11B-802.1.5 Overlap
-
§ 37.165(b)(1)
decline to carry a wheelchair/occupant if the combined weight exceeds that of the lift specifications or if carriage of the wheelchair is demonstrated to be inconsistent with legitimate safety...
-
1.1.10 Availability of codes
Each state department concerned and each city, county or city and county shall have an up-to-date copy of the code available for public inspection, See Health and Safety Code Section 18942...
-
§ 37.5(h)
provide service to an individual with disabilities because that individual engages in violent, seriously disruptive, or illegal conduct, or represents a direct threat to the health or safety...
-
1.1.10 Availability of codes
Each state department concerned and each city, county or city and county shall have an up-to-date copy of the code available for public inspection, See Health and Safety Code Section 18942...
-
802.1.5 Overlap
The term "circulation paths" used in Section 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
- Rebuilding Together Fairfield County - Stamford, CT
-
11B-1002.4.4.1 Width and length
Wheelchair spaces shall provide a clear width of 30 inches (762 mm) minimum and a clear length of 48 inches (1219 mm) minimum measured to 9 inches (229 mm) minimum above the floor surface...
-
11B-411.2.1.7.4 Adjacency assignment
Exception: The most adjacent elevator serving the selected floor shall be assigned by hall call consoles located outside the elevator landing....
-
11B-411.2.1.7.4 Adjacency assignment
Exception: The most adjacent elevator serving the selected floor shall be assigned by hall call consoles located outside the elevator landing....
-
Width and Length: ADA Standard Section 1002.4.4.1
Wheelchair spaces shall provide a clear width of 30 inches (760 mm) minimum and a clear length of 48 inches (1220 mm) minimum measured to 9 inches (230 mm) minimum above the floor surface...
-
11B-1002.4.4.1 Width and length
Wheelchair spaces shall provide a clear width of 30 inches (762 mm) minimum and a clear length of 48 inches (1219 mm) minimum measured to 9 inches (229 mm) minimum above the floor surface...
-
Escalators
In the final rule, the Board has added a reference to relevant provisions in the ASME A17.1 Safety Code for Elevators and Escalators instead of providing its own specification (810.9)....
-
A. Executive Orders 12866 and 13563—Summary of Regulatory Assessment
available regulatory alternatives and, if regulation is necessary, to select regulatory approaches that maximize net benefits (including potential economic, environmental, public health and safety...
-
407 Elevators
This section also requires compliance with the industry safety code, ASME/ANSI A17.1- 2000 Safety Code for Elevators and Escalators....
-
Two-Way Communication
These requirements have been removed in the final rule because the referenced elevator safety code (ASME A17.1), as revised, adequately addresses these features or makes them unnecessary...
- Rebuilding Together Oakland East Bay - Oakland, CA
-
Re: Papa's Games
To further promote cleanliness and safety, we also offer professional Water Tank Cleaning Services in Karachi, ensuring a healthier living and working environment for our clients....
- Rebuilding Together Greater Haverhill - Haverhill, MA
- Hager Companies 5100 Series - Heavy Duty Surface Door Closer
-
11B-604.8.3 Coat hooks and shelves
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
AUTOMATIC DOOR
The switch that begins the automatic cycle may be a photoelectric device, floor mat or manual switch....
-
11B-604.8.3 Coat hooks and shelves
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....