At each, provide and maintain a portion of the main counter which is a minimum of 36 inches in length, with a maximum height of 36 inches; or provide an auxiliary counter with a maximum...
Search Results "Maximum Dimension"
-
Attachment I
-
Wheelchair Space or Transfer Seat or Transfer Device
To permit maximum design flexibility, the 2010 Standards permit designers to determine whether it is more appropriate to permit individuals who use wheelchairs to remain in their chairs...
-
Detectable Warning Surfaces at Shared Use Path Intersections
The edge of the detectable warning surface would be installed between 6 inches minimum and 12 inches maximum from the edge of the intersecting segments of the shared use paths and sidewalks...
-
Dune Crossings [1018.10]
When the running slope of a non-removable segment of a dune crossing is steeper than 1:20 (5 percent), the maximum length of the segment is specified in table 6, and a resting interval must...
-
Comparison: 2010 and 1991 ADA Standards for Accessible Design - Scoping Requirements
., Door opening shall provide clear width of 32 inches minimum, Thresholds shall be ½ inch high maximum....
-
3.3.11 180-Degree Turn
participants to complete a 180-degree turn in our sample was smaller than the UDI findings (Figure 3‒10), but our 95th percentile values for power chair and scooters users were larger than the maximum...
-
[2010 ADAS] 105.2.5 NFPA
However, Section 702 of these requirements limits the volume of an audible alarm to 110 dBA, rather than the maximum 120 dBA permitted by NFPA 72-1999....
-
11B-1003.2.1 Boat slips
Gangways shall not be required to comply with the maximum rise specified in Section 11B-405.6....
-
11B-603.2.3 Door swing
Other than doors to accessible water closet compartments, a door in any position, shall be permitted to encroach into the turning space by 12 inches (305 mm) maximum....
-
11B-302.2 Carpet
Pile height shall be ½ inch (12.7 mm) maximum. Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge....
-
11B-703.8.4 Character height
Exception: In assembly seating where the maximum viewing distance is 100 feet (30.5 m) or greater, the height of the uppercase “I” of low resolution VMS fonts shall be permitted to be 1...
-
11B-302.2 Carpet
Pile height shall be ½ inch (12.7 mm) maximum. Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge....
-
11B-603.2.3 Door swing
Other than doors to accessible water closet compartments, a door in any position, shall be permitted to encroach into the turning space by 12 inches (305 mm) maximum....
-
Boat Slips: ADA Standard Section 1003.2.1
Gangways shall not be required to comply with the maximum rise specified in 405.6. 3....
-
11B-703.8.4 Character height
Exception: In assembly seating where the maximum viewing distance is 100 feet (30.5 m) or greater, the height of the uppercase “I” of low resolution VMS fonts shall be permitted to be 1...
-
11B-1003.2.1 Boat slips
Gangways shall not be required to comply with the maximum rise specified in Section 11B-405.6....
-
Panda IS.14 All Aluminum IMPACT Lift & Slide System
Maximum Panel Height: Up to 14 feet or up to 20 feet with a true divider. Maximum Panel Width: Up to 5 feet....
-
Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
Maximum Panel Height: Up to 14 feet or up to 20 feet with a true divider. Maximum Panel Width: Up to 10 feet....
-
Section 1630.2(j)(1)(i) Broad Construction; not a Demanding Standard
(i) Broad Construction; not a Demanding Standard Section 1630.2(j)(1)(i) states: “The term ‘substantially limits’ shall be construed broadly in favor of expansive coverage, to the maximum...
-
M303.3.3 Ramped (Section-by-Section Analysis)
Access Board has retained in the final rule the original requirement for running slope, but has added an exception that permits a running slope not steeper than 1:8 for ramp runs with a maximum...
-
SAFE HARBOR
The 2010 Standards require paper towel dispensers to be a maximum of 48 inches from the floor. Are they out of compliance? No....
-
1117B.5.5, Item 4
Braille shall be placed a minimum of 3/8 inch (9.5 mm) and a maximum of 1/2 inch (12.7 mm) directly below the tactile characters; flush left or centered....
-
When Ramps Are Required
For example, to reach a 12-inch high deck or platform, a designer could use a 12-foot ramp with the maximum 1:12 slope, or a 14-foot ramp with a less-steep 1:14 slope....
-
M301.2.4 Unobstructed Transfer (Section-by-Section Analysis)
Specifically, the Access Board asked whether equipment parts should be permitted to extend a maximum of three inches horizontally beyond the edge of the transfer sides, provided they do...
