buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
Search Results "Kitchen Work Surface"
Filters
Commonly Searched Documents
-
11B-407.2.1.2 Size and shape
-
11B-407.2.1.5 Signals
Call buttons shall be internally illuminated with a white light over the entire surface of the button. [2010 ADA Standards] 407.2.1.5 Signals....
-
§ 36.105(c)(1)(i)
sleeping, walking, standing, sitting, reaching, lifting, bending, speaking, breathing, learning, reading, concentrating, thinking, writing, communicating, interacting with others, and working...
-
Practicable
Practicable—In this guidebook, practicable means work that can be completed within the limits of the applicable conditions for exceptions and results in a useful improvement for all....
-
Size
The scale worked very well for everyone except for the Capitol Building, which is very large....
-
§ 35.108(c)(1)(i)
sleeping, walking, standing, sitting, reaching, lifting, bending, speaking, breathing, learning, reading, concentrating, thinking, writing, communicating, interacting with others, and working...
-
Eunice Noell-Waggoner, IES, LC. Value, Contrast and Reflections
Reflective & Transparent Surfaces can be Dangerous Vertical Surfaces (slide 4) Two examples are shown of hazards from reflective and transparent vertical surfaces....
-
Literature Cited
ASTM F1292 Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment, ASTM, West Conshohocken,PA 19428 American Society for Testing and Materials...
-
Equalizer 1000 Series Exercise Machine
This pad works for the able bodied also. The lat bar can be pulled down behind the neck and down to the front of your chest. These are movements that work your back muscles....
-
Letter from The Assistant Secretary
UNITED STATES DEPARTMENT OF EDUCATION OFFICE FOR CIVIL RIGHTS THE ASSISTANT SECRETARY Dear Superintendents and Other School Administrators: Thank you for the essential work...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
1011.2.4 Openings
Openings in the clear ground space surface shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1011.2.4 Openings. ...
-
1011.2.4 Openings
Openings in the clear ground space surface shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1011.2.4 Openings....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
6. Maintenance and Back-up of TTY Equipment
The ADA regulation contains a specific provision requiring that covered entities maintain their accessible features and equipment in operable working condition.4 To comply with this regulation...
-
QUESTION: WHAT QUESTIONS IS IT PERMISSIBLE TO ASK OF A PERSON WITH A DISABILITY CONCERNING A SERVICE ANIMAL?
A PVO may ask: if the animal is required because of a disability, and what work or task the animal has been trained to perform....
-
3.4 Staff-Related Barriers and Solutions
Barriers Solutions Simple/Low cost Involved / High cost Staff is hard to find when you need help Work out a signal with one or...
-
Tent Pads and Tent Platforms
Accessible surfaces for pitching tents may or may not be at ground level....
-
Addendum A: List of Terms
Non-level Transfer- A transfer where the transfer surface is higher or lower than the wheelchair seat to floor height....
-
Accessible Slopes
Put the level on the surface in the direction you are measuring. ...
-
1132A.4 Level floor or landing
Primary entry doors, required exit doors or secondary exterior doors with changes in height between the interior surface or floor level and the exterior surface or floor level shall comply...
-
Gates, Bars, and Berms
Frequently, a little shovel or carpentry work will correct the problems....
-
§ 37.43(a)(4)
., issuance of notice to proceed or work order, as applicable) after January 25, 1992, or, in the case of intercity and commuter rail stations, after October 7, 1991....
