Grab bars shall not be required to be installed in a shower located in a bathing facility for a single occupant accessed only through a private office, and not for common use or public use...
Search Results "Seat Location"
-
608.3 Grab Bars
-
606.1 General
If soap and towel dispensers are provided, they must be located within the reach ranges specified in 308....
-
606.1 General
If soap and towel dispensers are provided, they must be located within the reach ranges specified in 308....
-
11B-406.5.10 Diagonal curb ramps
Diagonal curb ramps with flared sides shall have a segment of curb 24 inches (610 mm) long minimum located on each side of the curb ramp and within the marked crossing....
-
11B-406.5.10 Diagonal curb ramps
Diagonal curb ramps with flared sides shall have a segment of curb 24 inches (610 mm) long minimum located on each side of the curb ramp and within the marked crossing....
-
Additions: ADA Standard Section 240.1.1
Section 240.1.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for additions to play areas.
-
213 Toilet Facilities and Bathing Facilities
Commenters felt that this would severely limit choice and availability of accessible toilet rooms at such locations....
-
M301.2.3 Transfer Sides
The configuration of stretchers will not allow for unobstructed access to a transfer surface located at either the foot end or head....
-
D. Election Day Compliance Review
The EDSs will be required to document their compliance reviews (both compliant and non-compliant polling place locations) with photographs....
-
Takeform Fusion Signage Floor Directional Type B
Locations Corridor intersections Elevator exits Stairwell exits Type B 12.25"w x 21.25"h Insert Size: 11"w x 17"h Available in different styles,...
-
Grab bars
The 2.75-inch was added to examine the effects of a handheld when located closer to the transfer surface. ...
-
Types of Alternative Designs
Swing-away grab bars were typically located on both sides of the toilet rather than fixed grab bars on the side and rear walls as indicated in ADAAG....
-
604.8.3 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
603.4 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
11B-704.2.1 Clear floor or ground space
The clear floor or ground space shall not be obstructed by bases, enclosures, or seats. [2010 ADAS] Advisory 704.2.1 Clear Floor or Ground Space. ...
-
§382.133(b)
within the United States, an electronic assistive device specified in paragraph (d) of this section on all aircraft originally designed to have a maximum passenger capacity of more than 19 seats...
-
Adjustable gap protocol
The platform height remained level with their WMD seat height. ...
-
Carrier Programs
Carriers operating aircraft with more than 19 passenger seats must establish and implement a written program for carrying out the requirements of the law....
-
407.12 Reach Height
This provision allows operable parts of ICT to be designed to be reached by a person seated in a wheelchair from a forward or side position, depending upon the design....
-
704.2.1 Clear Floor or Ground Space
The clear floor or ground space shall not be obstructed by bases, enclosures, or seats. Advisory 704.2.1 Clear Floor or Ground Space....
-
Issue 6: Pre-timed signals (an APS is more than a pushbutton)
Thus pushbutton-integrated APS should be installed at pre-timed locations even if it is not necessary to use the pushbutton to call the WALK. ...
-
11B-505.5 Clearance
Handrails may be located in a recess if the recess is 3 inches (76 mm) maximum deep and 18 inches (457 mm) minimum clear above the top of the handrail....
-
1009.6.4 Separation
Areas of refuge located within an enclosure for interior exit stairways complying with Section 1023. 2....
-
1009.6.4 Separation
Areas of refuge located within an enclosure for interior exit stairways complying with Section 1023. 2....
