Faded, chipped, damaged, or deteriorated paint in otherwise fully compliant parking spaces and passenger access aisles; and 7) The presence or condition of detectable warning surfaces on ramps...
Search Results "Ramp Width"
Commonly Searched Documents
-
11. Fixing my business will be too expensive; therefore, I am unable to do anything to reduce my risk.
-
Test Courses & Surfaces
This “access route” was 574.2 ft (175.0 m) in length, and included two 137 ft (41.8 m) sections with grades of 4% to 5% (one uphill, one downhill), and two 30-foot (9.1 m) ramps with grades...
- American Standard Madera 1.6 gpf ADA Toilet with Exposed Manual Flush Valve System
- American Standard Madera 1.28 gpf ADA Toilet with Exposed Manual Flush Valve System
- AJW Architectural Products U199 Series Lever Operated, ABS Roll Towel Dispenser - Surface Mounted
- Midmark 647 Barrier-Free® Power Podiatry Procedures Chair
- American Safety Tread Co., Inc. Type T-24 Contrasting Stripe
- TownSteel ED1100F Grade 1 Fire Rim Device
- Inpro Corporation ENDURANT® Trench Drain Receptor
- Mohawk Group Enthralled II Carpet Tiles
- Living Earth Crafts Cloud 9 Cuvee Spa Treatment Table
-
Passenger Loading Zones
Commenters raised a variety of issues about the requirements at section 503 of the 2010 Standards stating that the requirements for an access aisle, width, length, and marking of passenger...
-
Grab bars
Since transfer seat width was a modifiable variable in the study, the grab bars were designed to have a range between 18 and 30 inches....
-
11B-603.2.3 Door swing
Additionally, the door swing cannot reduce the required width of an accessible route....
-
CASI Accessibility Construction Inspection Checklist
construction inspection finish product thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not limited to, widths...
-
CALBO Accessibility Construction Inspection Checklist
construction inspection finish product thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not limited to, widths...
-
220 Automatic Teller Machines and Fare Machines
Accessible fare collection devices shall have a minimum clear opening width of 32 inches; shall permit passage of a wheelchair; and, where provided, coin or card slots and controls necessary...
-
Lift Compatibility (M301.4 and M302.4)
Lifts can vary in width along their length, and are usually the widest at the front casters and narrower at the patient sling location....
- GE Cafe™ Series 30" Free-Standing Gas Double Oven with Convection Range CGS990SETSS
- Panda S.90 All Aluminum Slim Profile Multi-Slide Door System
-
Section 6.0 Conclusions
While the research methods used in the U.K. program (2-D photogrammetry) only provide data on limited landmarks like occupied width and length and the features of devices, it can be used...
-
Section 36.304 Removal of Barriers (Preamble, Section-by-Section Analysis)
Ramping a single step, however, will likely be readily achievable, and ramping several steps will in many circumstances also be readily achievable....
-
Priorities for Barrier Removal
For example, a restaurant with several steps leading to its entrance may determine that it cannot afford to install a ramp or a lift....
-
Sloped Surfaces
Measuring the slope of a ramp, parking space, pedestrian route, or other ground or floor surface is important to identify whether the surface is accessible....