Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
Search Results "Ground Level Play Component"
2010 ADA Definition
Ground Level Play Component: A play component that is approached and exited at the ground level.
Filters
Commonly Searched Documents
-
404.2.7 Door and Gate Hardware
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-612.2 Bench
Exception: A readily removable bench shall be permitted to obstruct the turning space required by Section 11B-612.3 and the clear floor or ground space required by Section 11B-903.2....
-
Schindler's Elevator PORT (Personal Occupant Requirement Terminal)
Access control - Schindler's PORT Technology can play a significant role in managing and controlling access within your building....
-
BEA Inc. LZR-Microscan Swinging Door Sensor
Standalone, door-mounted safety system combines overhead and door-mounted presence detection that exceeds ANSI 156.10 section 8.2.2.3 Reduced installation time due to simple plug and play...
-
ASI Storage Solutions Competitor Locker
This collection, available in one- through six-tier configurations, features 14 gauge doors and 18 gauge backs; all other components are 16 gauge....
-
F221.2.3.1 Horizontal Dispersion
Horizontal dispersion of wheelchair spaces is the placement of spaces in an assembly facility seating area from side-to-side or, in the case of an arena or stadium, around the field of play...
-
Step 5 - Conduct a Self-Evaluation
The Title II regulations and ADA Standards were changed to include recreation areas from play areas to swimming pools, residential facilities, event ticketing policies, policies concerning...
-
Universal Design in Practice
Don't Play Hide-And-Seek 13. Be Sensitive to All Your Other Design Criteria - INTEGRATE Universal Design 14. Don't Be Efficient at the Expense of Being Effective 15....
-
Vertical Surface Discontinuities
Vertical differences in level between two adjacent surfaces....
-
6b.
Is the change in level from the floor to the lift surface ramped or beveled? Yes _____ No _____...
-
11B-1009.2.7 Operation
The lift shall be capable of unassisted operation from both the deck and water levels....
-
11B-1009.2.7 Operation
The lift shall be capable of unassisted operation from both the deck and water levels....
-
BraunAbility Millenium 2 Wheelchair Lift for School Buses, Cutaway Buses, and Paratransit Vans
Features include: NHTSA Compliant 800lb lifting capacity Floor to ground lift heights up to 48" Hydraulically operated roll-stop Excellent reliability...
-
AJW Architectural Products US19 Collapsable Security Hook, Exposed Mounting - Surface Mounted
All seams are tig welded and ground smooth. Pivoting ball joint releases when excessive force is applied. (Aprx. 15lbs.) Back plate has weld nuts to receive 1/4"-20 studs....
-
1. General Exception
the manufacturers of imaging equipment consistently raised concerns about inherent barriers to compliance with the proposed MDE Standards due to the location of imaging and mechanical components...
-
Entrances
Entrances Problem The entrance area must be level (no level change greater than ½ inch) and should not slope steeply in any one direction....
-
Gates
Section 404, as all of Chapter 4, addresses accessible routes and components of such routes....
-
1117B.5.5, Item 2
SECTION 1117B - OTHER BUILDING COMPONENTS 1117B.5 Signs and identification. ...
-
5.7.1 Lift Compatibility Clearance in Base for M301
Equipment components are permitted to be located within 8 inches maximum of the centerline of the clearance width....
-
G.6.iv. - What should be included in the undue burden determination?
cost of acquiring EIT that meets the applicable technical provisions along with an explanation of how costs were estimated, and a description of all the funds available to the program or component...
