protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum above the floor or ground surface...
Search Results "Fire-Building Surface"
Commonly Searched Documents
-
Permitted Protrusions in Wheelchair Spaces: ADA Standard Section 1002.4.4.3
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum above the floor or ground surface...
-
11B-217.4 TTYs
Separate requirements are provided based on the number of public pay telephones provided at a bank of telephones, within a floor, a building, or on a site....
-
Key Differences Between Routes
Accessible Routes—An accessible route is a continuous, unobstructed path that connects all accessible elements and spaces of a building or facility....
-
Meeting Purpose
and others unable to use steps: Will need assistance May need to use evacuate devices Are evacuation devices available for use in multi-story buildings...
-
11B-101.1 General
This chapter contains scoping and technical requirements for accessibility to sites, facilities, buildings, and elements by individuals with disabilities....
-
Q: What types of telephone emergency services are covered by Title II of the ADA?
A: The phrase "telephone emergency services" applies to basic emergency service -- police, fire, and ambulance -- that are provided by public safety agencies, including 9-1-1 (or, in some...
-
1009.8.1 System requirements
Two-way communication systems shall provide communication between each required location and a central control point location approved by the fire department....
-
Ramp
A walking surface that has a running slope steeper than 1:20....
-
ACCESSIBLE MEANS OF EGRESS
A continuous and unobstructed way of egress travel from any accessible point in a building or facility to a public way. [2010 ADA Standards 106.5] Accessible Means of Egress....
-
11B-233.3.1.2.6 Public housing facility site impracticality
The site impracticality tests in this section may be used to determine the number of required residential dwelling units with adaptable features in buildings without an elevator, located...
-
Alterations
Chapters 3 – 10: Design and Technical Requirements Provides design and technical specifications for elements, spaces, buildings, and facilities....
- PSA: We Prepare Everyday by FEMA, the Ready Campaign and Ad Council
-
Summary of the project
Summary of the project Throughout the course of the project representatives from various trade organizations that represent the following materials that may be used for exterior surfaces...
-
TEMPORARY
[DSA-AC] Buildings and facilities intended for use at one location for not more than one year and seats intended for use at one location for not more than 90 days....
-
Detectable Warnings: ADA Standard Section 705
Detectable warnings shall consist of a surface of truncated domes and shall comply with 705....
-
Walk
An exterior prepared surface for pedestrian use, including pedestrian areas such as plazas and courts....
-
General: ADA Standard Section 705.1
Detectable warnings shall consist of a surface of truncated domes and shall comply with 705....
-
GRADE BREAK
[DSA-AC] The line where two surface planes with different slopes meet....
-
TRANSITION PLATE
[DSA-AC] A sloping pedestrian walking surface located at the end(s) of a gangway....
-
Height Above Finish Floor or Ground: ADA Standard Section 703.4.1
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
11B-405.9.2 Curb or barrier
or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground surface...
-
11B-801.1 Scope
For example, Section 11B-806 addresses guest rooms in transient lodging facilities while Section 11B-902 contains the technical specifications for dining surfaces....
-
The Purpose of FSORAG and FSTAG
has to comply with the guidelines; definitions of terms; and technical requirements defining the physical characteristics of accessible features, such as width, height, slope, length, surface...
