(a) When the designated agency issues a noncompliance Letter of Findings, the designated agency shall—...
Search Results "Seat Designation"
Commonly Searched Documents
-
§ 35.173(a)
- Kompan, Inc. M143 - Albatross Seesaw
-
Van Accessible Signage
spaces over those designed to accommodate vans....
-
4.10.12(2)
The call button for the main entry floor shall be designated by a raised star at the left of the floor designation (see Fig. 23(a))....
-
4.10.12(2)
The call button for the main entry floor shall be designated by a raised star at the left of the floor designation (see Fig. 23(a))....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-225.2.1 Lockers
Different types of lockers may include full-size and half-size lockers, as well as those specifically designed for storage of various sports equipment. ◼...
-
Examination Chair
Diagnostic equipment with a seat in which a patient typically is positioned with buttocks approximately parallel to the ground and shins approximately perpendicular to the ground....
-
219 Assistive Listening Systems
Section 219.3 specifies the minimum number of receivers according to a sliding scale based on the seating capacity of the assembly area....
-
12182(b)(2)(B)(i) Accessibility
shall be considered discrimination for a private entity which operates a fixed route system and which is not subject to section 12184 of this title to purchase or lease a vehicle with a seating...
-
4.1.7(3)(e)
., should be located where they can be seen by a seated person....
-
§ 38.125(a)(1) General
., lift, ramp or bridge plate) complying with either paragraph (b) or (c) of this section and sufficient clearances to permit a wheelchair or other mobility aid user to reach a seating location...
-
11B-612.2 Bench
Where seating is provided in saunas and steam rooms, at least one bench shall comply with Section 11B-903....
-
11B-104.1.1 Construction and manufacturing tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
214 Washing Machines and Clothes Dryers
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different New...
-
Legislation
The Architectural Barriers Act of 1968 (ABA) ensures that buildings which are designed, built or altered by federal funding or leased by federal agencies are accessible to the public....
-
11B-405.8 Handrails
[2010 ADA Standards] EXCEPTION: Within employee work areas, handrails shall not be required where ramps that are part of common use circulation paths are designed to permit the installation...
-
H. Your Obligation to Provide Services and Equipment
[Sec. 382.39(a)(1)] Aircraft with more than 60 passenger seats having an accessible lavatory must be equipped with an operable on-board wheelchair....
-
Wheelchair
[35.104 & 36.104] A manually-operated or power-driven device designed primarily for use by an individual with a mobility disability for the main purpose of indoor or of both indoor and...
-
Van Accessible Signage
The proposed rule removed a requirement that the access designation for van parking include the term "van accessible" to clarify that both car and van drivers can use such spaces, as was...
-
Adaptability
Adaptability Toilet rooms designed for use by a single occupant of a specific space, can be designed to be "adaptable" so that accessible elements can be installed when needed after construction...
-
11B-407.2.1.4 Location
The call button that designates the up direction shall be located above the call button that designates the down direction. Exception: Reserved....
-
4.3.2 Transfer Surfaces and Imaging Equipment Functions
These demands also place some inherent limitations on the design options for transfer surfaces or tables....
-
Viewing Areas
Design Tip Design guardrails for safety and views....