Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
Search Results "Height Adjustable"
-
AJW Architectural Products UG20-Railing UG20X-Y108 108" Concealed Set Screw Flange, 1.25" Diameter, Peened Grip - Configuration Y
-
AJW Architectural Products UG2-A Series UG2-A12 12" Concealed Snap Flange, 1.25" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Kawneer North America 190/350/500 Standard Entrances
Vertical stiles and top rail are 5" (127); bottom rail measures 6-1/2" (165.1) Results in superior strength for buildings experiencing heavy traffic conditions General Heights...
-
AquaTrek2 ADA Step System
MEETS OR EXCEEDS ADA REQUIREMENTS: No Open Risers 7” Maximum Riser Height 12” Minimum Tread Depth 24” Maximum Width Between Handrails Top Landing...
-
Activar Hiawatha 535/509/536/537 Solid 1 inch Diameter Pulls
• Plate & Pull Combinations • Standard Pulls • Push & Pull Bar Sets • Custom & Unique Pulls • Full Height Pulls • Door Protection Plates & Edges • Auto...
-
AJW Architectural Products UG120-A Series UG120-A12 12" Exposed Flange, 1.25" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Kawneer North America Flushline™ Entrances
6.4) or 1" (25.4) infills The aluminum provides a flush appearance while the gasket achieves an architectural look through radiused corners Hardware options allow customization Heights...
-
[2010 ADAS] 105.2.2 ASME
The maximum permitted height for operable parts is consistent with 308 of this document. The standard also addresses attendant operation....
-
Railings—Guardrails, Handrails, and Safety
For safety, the International Building Code (IBC), http://www.iccsafe.org, section 1003.2.12 contains requirements for guardrail height and the spacing of rails where there is a drop off...
-
[2010 ADAS] 105.2.2 ASME
The maximum permitted height for operable parts is consistent with 308 of this document. The standard also addresses attendant operation....
-
Whether the definition of ‘‘wheelchair'' includes the Segway® PT. (Section-by-Section Analysis)
In a study of trail and other non-motorized transportation users including EPAMDs, the Federal Highway Administration (FHWA) found that the eye height of individuals using EPAMDs ranged...
-
New Jersey Division of Vocational Rehabilitation Services (DVRS)
The supported employment provider delivers on-the-job coaching to assist the customer in learning job duties and adjusting to the work environment....
-
Panda IS.14 Aluminum Wood Clad IMPACT Lift & Slide System
Maximum Panel Height: Up to 14 feet or up to 20 feet with a true divider. Maximum Panel Width: Up to 5 feet....
-
Panda S.15 All Wood with Aluminum Core Lift & Slide System
Maximum Panel Height: Up to 10 feet or up to 12 feet with a true divider. Maximum Panel Width: Up to 10 feet....
-
Panda S.12 Solid Wood Lift & Slide System
Header Track The header track features adjustable shims from 1/2 ″ to 1″ depending on type of bottom track and finished floor thickness....
-
Cal-Royal Products Grade 1 Cylindrical Lockset Calypso CAL Series
LATCH FACEPLATE - 2 1/4" x 1 1/8" adjustable for flat or beveled doors 1/8" in 2", for 2 3/4" backset. Optional 2 1/4" x 1 1/8" for 2 3/8" backset....
-
Cal-Royal HIL Series Interconnected Lockset
Adjustable 2 3/4" or 2 3/8", front 2 1/4" x 1 1/8" square face....
-
Cal-Royal Pioneer SL / CSL Series Cylindrical Lockset
LATCH FACEPLATE -2 1/4" x 1 1/8" adjustable for flat or beveled doors 1/8" in 2", for 2 3/4" backset. Optional 2 1/4" x 1" for 2 3/8" backset....
-
Wolf Cooktop Downdraft
ADJUSTABLE DISCHARGE Alows you to negotiate ducting around floor joists and other obstacles. DIRTY FILTER?...
-
The Land of Color LRV Guru™ App
A significant bonus feature of the app is that the contrast ratio can be adjusted by tapping “settings” and positioning the slide bar as desired....
-
Excel Dryer, Inc. CAST Cover Series HANDS ON® Push Button Activated Hand Dryers and Hair Dryers
The air nozzle can also be fixed into a stationary downward position by means of a simple on-sight adjustment....
-
Oval Fire Products 10 LB Chemical ABC Fire Extinguisher A-10JABC
Choose any 12 inch width x 27 inch height cabinet from the JL Industries catalog and ask for the “Oval” option....
-
AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Pilot Rock FSW-26/18 Campfire Ring
Model FSW-26 Series Campfire Ring features a 24” inside diameter and is available in a single side height of 16-7/8”....
