Tactile characters shall be 2 inches (51 mm) high minimum. Figure 407.2.3.2 Car Designations on Jambs of Destination-Oriented Elevator Hoistway Entrances...
Search Results "High Energy Door"
Filters
Commonly Searched Documents
-
407.2.3.2 Car Designations
-
C. Food Service
.: direct counter service) at counters or bars, is there a minimum 60" long portion providing a 27" high knee space, at least 19" deep, with the counter top at 28"-34" above the floor, or...
-
12162(e)(2)(A)(iii) Designation of key stations
in its commuter rail transportation system, in consultation with individuals with disabilities and organizations representing such individuals, taking into consideration such factors as high...
-
4.10.5 Raised and Braille Characters on Hoistway Entrances
Such characters shall be 2 in (50 mm) high and shall comply with 4.30.4. Permanently applied plates are acceptable if they are permanently fixed to the jambs. (See Fig. 20)....
-
Dining Room
cost Computer monitors in the DR, spa and LR (for increased text size and training) Gas fireplace in the dining room as an additional heat source for older people who need high...
-
A4.1.3(9)
Because of these monitoring features, supervised automatic sprinkler systems have a high level of satisfactory performance and response to fire conditions....
-
4.2.6* SIDE REACH
If the clear floor space allows parallel approach by a person in a wheelchair, the maximum high side reach allowed shall be 54 in (1370 mm) and the low side reach shall be no less than 9...
-
§382.125(c)
(c) You must provide for the checking and timely return of passengers' wheelchairs, other mobility aids, and other assistive devices as close as possible to the door of the aircraft, so...
-
D5
If there is a raised threshold, is it no higher than 3/4 inch at the door and beveled on both sides?...
-
M5
If there is a raised threshold, is it no higher than 3/4 inch at the door and beveled on both sides?...
-
5e.
Are signs mounted on both sides of the elevator hoistway door opening that designate the floor with 2-inch minimum-height raised letters and Braille characters centered at 60 inches above...
-
A4.13.8 Thresholds at Doorways
particularly inconvenient for wheelchair users who also have low stamina or restrictions in arm movement because complex maneuvering is required to get over the level change while operating the door...
-
Hardware [4.25.4]
Hardware [4.25.4] Hardware should be exposed (as required for sliding doors in 4.13) and must: be automatic or operable with one hand operate without tight grasping,...
-
A4.13.8 THRESHOLDS AT DOORWAYS
particularly inconvenient for wheelchair users who also have low stamina or restrictions in arm movement, because complex maneuvering is required to get over the level change while operating the door...
-
III-7.5190 Dressing and fitting rooms
Technical standards are provided for doors, benches, and mirrors, with less stringent standards for alterations....
-
Designations: ADA Standard Section 216.2
Section 216.2 covers scoping requirements in the current ADA Standards for sign designations.
-
Application Based on Building or Facility Use: ADA Standard Section 201.2
Section 201.2 covers the application of the most current requirements based on the building or facility use.
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
Signs required by Chapter 10, Section 1009.9 at doors to areas of refuge and exterior areas for assisted rescue shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5...
-
Developing a plan based on priorities
Priority 1: Getting through the Door The first priority is to make sure individuals with disabilities can physically enter the facility as independently as possible....
-
A. Question 1: Applicability of Section 904.4.1’s Exception
Section 904.4.1 and its exception both require that a sales or service counter be “36 inches (915 mm) high maximum above the finish floor,” and Section 904.4.1 further requires that a sales...
-
810.5.3 Platform and Vehicle Floor Coordination
The preferred alignment is a high platform, level with the vehicle floor. In some cases, the vehicle guidelines permit use of a low platform in conjunction with a lift or ramp....
-
11B-407.2.3.1 Floor designation
Raised characters shall be 2 inches (51 mm) high. A raised star, placed to the left of the floor designation, shall be provided on both jambs at the main entry level. ...
-
810.5.3 Platform and Vehicle Floor Coordination
The preferred alignment is a high platform, level with the vehicle floor. In some cases, the vehicle guidelines permit use of a low platform in conjunction with a lift or ramp....
-
10.3.1(9)
For rapid rail, light rail, commuter rail, high speed rail, and intercity rail systems in new stations, the horizontal gap, measured when the new vehicle is at rest, shall be no greater...