Toilet and bathing fixtures required to comply with 603 through 610 shall be permitted to be located in more than one toilet or bathing area, provided that travel between fixtures does not...
Search Results "Raised Area"
Filters
Commonly Searched Documents
-
Toilet and Bathing Facilities: ADA Standard Section 806.2.4
-
11B-602.9 Pedestrian protection
The protected area within which a drinking fountain is located shall be 32 inches (813 mm) wide minimum and 18 inches (457 mm) deep minimum, and shall comply with Section 11B-305.7....
-
Accessible Routes in Dwelling Units with Mobility Features
Sections 4.34.1 and 4.34.2 of the UFAS require the living area, kitchen and dining area, bedroom, bathroom, and laundry area, where provided, in covered dwelling units with mobility features...
-
Signs
Section 216.10 of the 2010 Standards requires each covered assembly area to provide signs at each auditorium to inform patrons that assistive listening systems are available....
-
G. Chapter 6: Wheelchair Spaces and Securement Systems
With the exception of two areas, this chapter has been neither significantly reorganized nor substantively revised from the proposed rule....
-
4.33.3* Placement of Wheelchair Locations
Wheelchair areas shall be an integral part of any fixed seating plan and shall be provided so as to provide people with physical disabilities a choice of admission prices and lines of sight...
-
Visual Alarms [4.28.3]
Visual alarms are required in hallways, lobbies, restrooms, and any other general usage and common use areas, such as meeting and conference rooms, classrooms, cafeterias, employee break...
-
3.4 Staff-Related Barriers and Solutions
Simple/Low cost Involved / High cost Staff is hard to find when you need help Work out a signal with one or two staff members who will be in the area...
-
III-4.2200 Specialties
It is not considered discriminatory for a public accommodation with a specialty in a particular area to refer an individual with a disability to a different public accommodation if --...
-
§ 38.159(d)(2) Location and size
The securement system shall be placed as near to the accessible entrance as practicable and shall have a clear floor area of 30 inches (760 mm) by 48 inches (1220 mm)....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
For example, the geometric symbol may be used as the sign background with raised characters and Braille per Sections 11B-703.2 and 11B-703.3. ◼...
-
7. Q: What about applicants with a history of illegal drug use? Do they have rights under the ADA?
Denying employment to job applicants solely because of a history of casual drug use would not raise ADA concerns....
-
Debra E. Babcock, PMP: Information Center for Accessibility Needs (iCAN) at IRS
Building accessibility and navigation were raised as problems in several locations (slide 3)....
-
QUESTION: WHAT CONSTITUTES AN ALTERATION TO A PLATFORM FOR PURPOSES OF TRIGGERING THE APPLICATION OF SECTION 37.42 REQUIREMENTS?
For example, if the platform height relative to the top of rail is raised, if the old surface is removed and/or a new surface put down, or if there is a reconstruction of or structural change...
-
Electronic File(s) As An Alternate Format
These devices can be connected to a computer, and as the user moves the cursor through the electronic text, the display device raises and lowers pins in various combinations to create Braille...
-
11B-219.3 Receivers
Receivers complying with 706.2 shall be provided for assistive listening systems in each assembly area in accordance with Table 219.3....
-
Exception 8
to provide, priority should be given to those elements that will provide the greatest access in the following order: An accessible entrance; An accessible route to the altered area...
-
11B-219.3 Receivers
Receivers complying with 706.2 shall be provided for assistive listening systems in each assembly area in accordance with Table 219.3....
-
11B-219.3 Receivers
Receivers complying with 706.2 shall be provided for assistive listening systems in each assembly area in accordance with Table 219.3....
-
General: ADA Standard Section 234.1
Section 234.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for amusement rides.
-
11B-234.3 Minimum number
These rides are not exempt from the other provisions in Section 11B-234 requiring an accessible route to the load and unload areas and to the ride....
-
11B-201.1 Scope
All areas of newly designed and newly constructed buildings and facilities and altered portions of existing buildings and facilities shall comply with these requirements....
-
Wikk Industries Inc. Bollard With Push Plate Part #BPR8 SM AINS32D (630)
Flat Recessed area for ADA switch and Card Reader. Welded angle top to the back. Shown on the bollard- 6x6-3 US32D (630), Switch is sold separately....
-
Sec.36.403(c)(1)(iii)
(iii) Redesigning the assembly line area of a factory; or...
