The surface on which the patient stands shall be slip resistant....
Search Results "Writing Surface"
Commonly Searched Documents
-
M304.2 Standing Surface
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
M304.2 Standing Surface
Equipment surfaces on which patients stand must comply with M304.2...
-
1011.5.1 Fire Building Surfaces
Fire building surfaces shall be 9 inches (230 mm) minimum above the ground....
-
1011.5.1 Fire Building Surfaces
Fire building surfaces shall be 9 inches (230 mm) minimum above the ground....
-
409.4.2 Floor Surfaces
409.4.2 Floor Surfaces. Floor surfaces in elevator cars shall comply with 302 and 303....
-
INTRODUCTION
, the surface returns to its original condition; Firmness ā the degree of surface resistance to deformation, especially by indentation or the movement of objects; and Slip-resistance...
-
11B-902 DINING SURFACES AND WORK SURFACES
[See subsections ...]
-
11B-226 DINING SURFACES AND WORK SURFACES
[See subsections ...]
-
11B-226 Dining surfaces and work surfaces.
[See subsections ...]
-
11B-902 Dining surfaces and work surfaces
[See subsections ...]
-
11B-902 Dining surfaces and work surfaces
[See subsections ...]
-
11B-226 Dining surfaces and work surfaces
[See subsections ...]
- Miracle Sealant Slip-Resistant Flooring Treatment
-
Part I. A Longitudinal Study of Trail Surfaces Final Report
A Longitudinal Study of Trail Surfaces Final Report...
-
Part II. National Trail Surface Survey Final Report
National Trail Surface Survey Final Report...
-
Installation of Test Surfaces
Installation of Test Surfaces In accordance with standard EWF design and construction practice (Figure 2), the full depth surfaces were prepared to the same requirements needed for permanent...
-
Installation of Aggregate Surfaces at Bradford Woods
Installation of Aggregate Surfaces at Bradford Woods The installation of the aggregate surfaces at Bradford Woods conformed to the following protocol: Prior to installing the crushed...
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel....
-
1014.3 Floor
This section requires the floor surface within camp shelters to be firm and stable and to slope not steeper than 1:48 in any direction....
- Envirobond is Self-Healing
- Organic-Lock: The Self-Healing Organic Binder