(e) Except as otherwise provided in this paragraph, the provisions of §§8.21(a) and (b), 8.22(a) and (b), 8.23, 8.25(a)(1) and (2), and 8.29 shall apply to facilities that are designed,...
Search Results "Universal Design"
-
§8.32(e)
-
101.1 General
The requirements are to be applied during the design, construction, additions to, and alteration of sites, facilities, buildings, and elements to the extent required by regulations issued...
- Collaboratory for Technology, Health, and Independence (CTHI): University of Michigan
- Signaids Floor Numbering and Stair Shaft Designation-Style 2
- Signaids Floor Numbering and Stair Shaft Designation-Style 1
- Figure 703.4.1 Height of Tactile Character Above Finish Floor or Ground – Drawing from the U.S. Access Board
- The Ohio State University ADA Coordinator's Office
- The Helen Hamlyn Centre for Design at the Royal College of Art
-
D. Signage
Signage (1) Defendants will install directional signage to indicate accessible entrances, and the routes from inaccessible entrances to designated accessible entrances....
- Tactile Design for Universal Access
-
11B-407.4.7.1.4 Visible indicators
Buttons with floor designations shall be provided with visible indicators to show that a call has been registered....
-
407.4.7.1.4 Visible Indicators
Buttons with floor designations shall be provided with visible indicators to show that a call has been registered....
-
11B-407.4.7.1.4 Visible indicators
Buttons with floor designations shall be provided with visible indicators to show that a call has been registered....
-
11B-407.4.7.1.4 Visible indicators
Buttons with floor designations shall be provided with visible indicators to show that a call has been registered....
-
407.4.7.1.4 Visible Indicators
Buttons with floor designations shall be provided with visible indicators to show that a call has been registered....
-
407.4.7.1.4 Visible Indicators
Buttons with floor designations shall be provided with visible indicators to show that a call has been registered....
-
101.1 General
The requirements are to be applied during the design, construction, additions to, and alteration of sites, facilities, buildings, and elements to the extent required by regulations issued...
-
216.2 Designations
216.2 Designations. Interior and exterior signs identifying permanent rooms and spaces shall comply with 703.1, 703.2, and 703.5....
-
12147(a) General rule
(a) General rule With respect to alterations of an existing facility or part thereof used in the provision of designated public transportation services that affect or could affect the...
-
1.1.5
1.1.5 A maximum design cross slope for accessible exterior pedestrian paving and ramps of 1.5% (1:67 or about 3/16 in. per ft. [15 mm per m]) is recommended....
-
F216.2 Designations
Where pictograms are provided as designations of permanent interior rooms and spaces, the pictograms shall comply with 703.6 and shall have text descriptors complying with 703.2 and 703.5...
-
216.2 Designations
Where pictograms are provided as designations of permanent interior rooms and spaces, the pictograms shall comply with 703.6 and shall have text descriptors complying with 703.2 and 703.5...
-
Jeanne Halloin, IES. Existing Standards and Design Guidance
[This presentation focused on accessibility issues. Excellent examples of criteria and guidance are given in the slides, but references to relevant codes/standards/guidelines are not...