Walks, halls, corridors, passageways, aisles, or other circulation spaces shall have 80 in (2030 mm) minimum clear head room (see Fig. 8(a))....
Search Results "Room Layout"
Commonly Searched Documents
-
4.4.2 Head Room
-
4.4.2 HEAD ROOM
Walks, halls, corridors, passageways, aisles, or other circulation spaces shall have 80 in (2030 mm) minimum clear head room (see Fig. 8(a))....
-
Saunas and steam rooms. (Section-by-Section Analysis)
The Department is proposing one specific provision to minimize the potential impact of the new requirements on existing saunas and steam rooms. ...
-
Clear Floor or Ground Space: ADA Standard Section 805.3
A clear floor space complying with 305 shall be provided on each side of the bed. The clear floor space shall be positioned for parallel approach to the side of the bed.
-
11B-809.10.8.6 Controls
Faucet controls and operating mechanisms shall comply with Section 11B-309.4.
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor. Where towel bars are provided they shall be...
-
11B-805.2.2 Beds
A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of the beds. [2010 ADA Standards] 805.3 Clear Floor or Ground Space. A clear floor...
-
803.2 Turning Space
Turning space complying with 304 shall be provided within the room....
-
803.2 Turning Space
Turning space complying with 304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
Communication Features in Guest Rooms
Guest rooms required to have accessible communication features are required to have visual alarms....
-
803.2 Turning Space
Turning space complying with 304 shall be provided within the room....
-
Coat Hooks and Shelves: ADA Standard Section 213.3.7
Section 213.3.7 covers scoping requirements in the current ADA Standards for coat hooks and shelves
-
§104.23(c)(2)
(2) For purposes of this section, section 4.1.6(1)(g) of UFAS shall be interpreted to exempt from the requirements of UFAS only mechanical rooms and other spaces that, because of their intended...
-
Scoping for Guest Rooms
These levels slightly differ from the original ADAAG at the higher levels (401 rooms and above)....
-
224 and 806 Transient Lodging Guest Rooms
[See subsections ...]
-
11B-806 TRANSIENT LODGING GUEST ROOMS
[See subsections ...]
-
11B-806 Transient lodging guest rooms
[See subsections ...]
-
11B-806 Transient lodging guest rooms
[See subsections ...]
-
Alterations to Accessible Units, Sleeping Rooms, and Suites [9.1.5]
Alterations to Accessible Units, Sleeping Rooms, and Suites [9.1.5] The minimum number of guest rooms required to be accessible in an alteration is based on the total number of guest...
-
11B-213.3.7 Coat hooks and shelves
Where coat hooks or shelves are provided in toilet rooms without toilet compartments, at least one of each type shall comply with Section 11B-603.4....
-
Guest Rooms
Reminder: The requirement for mobility accessible rooms and hearing-impaired accessible rooms are separate requirements allowing for minimal overlap. 806.3 Guest Rooms with Communication...