An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibule if provided, the entry door or gate, and the hardware...
Search Results "Gate"
Filters
Commonly Searched Documents
-
ENTRANCE
-
Entrance
An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibules if provided, the entry door(s) or gate(s), and the...
-
11B-410.8 Restriction sign
This section includes requirements which address platform size and gate configurations for lifts with 90-degree egress, and additionally requires signs posted at the landings as follows:...
-
General: ADA Standard Section 707.1
Place accessible gates and fare vending machines in close proximity to other accessible elements when feasible so the facility is easier to use....
-
Doors in a Series
Section 404.2.6 specifies the minimum separation between doors and gates in series (48 inches plus the width of doors or gates swinging into the space)....
-
Smooth Surface
Section 404.2.10 requires that swinging doors and gates have a smooth surface on the push side that extends their full width....
-
382.93 Must carriers offer preboarding to passengers with a disability?
Carrier must offer an opportunity for preboarding to passengers with a disability who self-identify at the gate as needing additional time or assistance to board, stow accessibility equipment...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Automatic Doors
Section 404.3 addresses automatic doors and gates, including those that are full-powered, low-energy, and power-assisted....
-
11B-404.2.4 Maneuvering clearances
Minimum maneuvering clearances at doors and gates shall comply with Section 11B-404.2.4....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Symmetry Vertical Platform Lift VPC-SL
another floor Upper final limit Platform Sizes : 36” W x 48” D 36” W x 54” D 36” W x 60” D 42” W x 60” D Vertical Platform Lift Gate...
-
410 Platform Lifts
Section 410 provides requirements for platform lifts and addresses floor surfaces, clear floor space, operable parts, and doors and gates....
-
11B-404.2.8.2 Spring hinges
Door and gate spring hinges shall be adjusted so that from the open position of 70 degrees, the door or gate shall move to the closed position in 1.5 seconds minimum....
-
ENTRANCE
An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibules if provided, the entry door(s) or gate(s), and the...
-
Are exit doors usable only in one direction required to comply on both sides?
Under the ADA Standards, compliance is not required on both sides of those doors or gates that can be used in one direction only, such as exit-only doors....
-
§382.91(b)
operator personnel and accepted by a passenger with a disability, in moving from the terminal entrance (or a vehicle drop-off point adjacent to the entrance) through the airport to the gate...
-
Opening Force [§404.2.9]
Opening Force [§404.2.9] The maximum 5 lbf opening force applies to all accessible doors and gates except: fire doors (minimum opening force allowed by code) exterior...
-
10.4.1(5)
If unattended security barriers are provided, at least one gate shall comply with 4.13....
-
10.3.1(19)
If unattended security barriers are provided, at least one gate shall comply with 4.13....
-
404.2.11 Vision Lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
-
404.2.8 Closing Speed
Door and gate closing speed shall comply with 404.2.8....
