Slopes of curb ramps shall comply with 4.8.2. The slope shall be measured as shown in Fig. 11. Transitions from ramps to walks, gutters, or streets shall be flush and free of abrupt...
Search Results "Counter Length"
Filters
Commonly Searched Documents
-
4.7.2 Slope
-
4.7.2 SLOPE
Slopes of curb ramps shall comply with 4.8.2. The slope shall be measured as shown in Fig. 11. Transitions from ramps to walks, gutters, or streets shall be flush and free of abrupt...
-
11B-231.4 Visiting areas
Visiting areas shall comply with 11B-231.4.
-
11B-231.4 Visiting areas
Visiting areas shall comply with Section 11B-231.4.
-
Kitchens, Kitchenettes, or Wet Bars [9.2.2(7)]
Kitchens, Kitchenettes, or Wet Bars [9.2.2(7)] Clear floor space for either a forward or a side approach is permitted for cabinets, counters, sinks, and appliances....
-
7.3(1)
Different “design” includes but is not limited to the following features - length of belt or no belt; or permanent signage designating the aisle as an express lane....
-
1133A.4, Item 3
Sinks and work surfaces may be a single integral unit a minimum of 60 inches (1524 mm) in length, or be separate components....
-
1133A.4, Item 3
Sinks and work surfaces may be a single integral unit a minimum of 60 inches (1524 mm) in length, or be separate components....
-
F232.5.2 Partitions
Where solid partitions or security glazing separate visitors from detainees or inmates, at least one of each type of cubicle or counter partition shall comply with 904.6....
-
232.5.2 Partitions
Where solid partitions or security glazing separate visitors from detainees or inmates at least one of each type of cubicle or counter partition shall comply with 904.6....
-
232.5.2 Partitions
Where solid partitions or security glazing separate visitors from detainees or inmates, at least one of each type of cubicle or counter partition shall comply with 904.6....
-
11B-502.2 Vehicle spaces
Car and van parking spaces shall be 216 inches (5486 mm) long minimum. Car parking spaces shall be 108 inches (2743 mm) wide minimum and van parking spaces shall be 144 inches (3658...
-
Kitchen Cabinets
(above finished floor) wall-mounted cabinets and counters for tall people....
-
11B-232.5.2 Partitions
Where solid partitions or security glazing separate visitors from detainees or inmates at least one of each type of cubicle or counter partition shall comply with Section 11B-904.6. ...
-
11B-232.5.2 Partitions
Where solid partitions or security glazing separate visitors from detainees or inmates at least one of each type of cubicle or counter partition shall comply with Section 11B-904.6....
-
11B-232.5.2 Partitions
Where solid partitions or security glazing separate visitors from detainees or inmates at least one of each type of cubicle or counter partition shall comply with Section 11B-904.6....
-
2. d. PATIENT RECEPTION DESKS
Reception desks should have a lower section where scooter and wheelchair users and people of short stature can easily communicate with staff. Compliant height range is 28 - 34...
-
1133A.4.1, Item 4
4. Finished flooring shall be extended to the wall beneath the sink and work surface.
-
Accessible Route Into and Through the Business
Staff the accessible sales counters and check-out aisles during all business hours....
-
Card Catalogs and Magazine Displays [8.4]
Requirements for fixed counters and tables [4.32] specify a surface height (34 inches maximum) and knee clearance below appropriate for extended use as a writing/work surface....
-
Position [§305.5]
A side approach is typically provided or required at sales and service counters, beds, and most appliances. Forward Approach Side Approach Centering...