Whether an employee work area or not, said lock, latch or other door hardware must be flush with the level of the smooth surface of the door unless it is concealed within the door or protected...
Search Results "Concealed Closer"
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
-
FEATURES
The corner radii allow for closer wheelchair positioning to facilitate independent transfer by minimizing gaps....
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding 5 lb Weight - Forward Approach Power Chair
distance away from the body (or barrier depth) when reaching over an obstruction in relation to the forward-most point, and the negative range implying that the reach target is brought closer...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding 5 lb Weight - Forward Approach Manual Wheelchair
distance away from the body (or barrier depth) when reaching over an obstruction in relation to the forward-most point, and the negative range implying that the reach target is brought closer...
-
Vertical Clearance [§307.4]
Headroom clearance of at least 80” high is required along all circulation paths (except at doors and doorways where a 78” minimum clearance is permitted to accommodate door stops and closers...
- AJW Architectural Products US712 Series U7128B-1216 12"Wx16"H Security Concealed Mount Mirror, Angle Frame, Stainless Steel Surface
-
Jean Tessmer
The door frame the button was installed on it looked like the button was placed a lot closer than 12' from the door and looked like it was close to where the door opens or closes....
- BYO Recreation Inc. Fun Hoop
-
Papa's Games
The "Closers" and Specials The game keeps things fresh with high-stakes customers called Closers who judge your work with extreme scrutiny....
-
19. Specific acts of Discrimination
These deletions bring the regulation closer in form to the Department of Labor's section 503 regulation....
-
4.4.4 Clear Floor or Ground Space
Shoulder alignment generally can be achieved by positioning the back of the bench so it is 8 inches (200 millimeters) closer to the outdoor recreation access route, trail, or beach access...
-
703.4.2 Location
EXCEPTION: Signs with tactile characters shall be permitted on the push side of doors with closers and without hold-open devices....
-
703.4.2 Location
EXCEPTION: Signs with tactile characters shall be permitted on the push side of doors with closers and without hold-open devices....
-
Location [4.6.2] and Dispersion
For example, spaces for an out-lying lot can be placed in a lot closer to the building served since accessible spaces must be located on the shortest accessible route to an accessible facility...
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic and power-assisted doors are often used by designers to provide accessibility when door closer pressure would exceed the allowable opening force for interior or exterior doors....
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic and power-assisted doors are often used by designers to provide accessibility when door closer pressure would exceed the allowable opening force for interior or exterior doors....
-
Priority 3: Toilet Rooms
Word Fillable Form (2.4MB) Word Non-Fillable Form (2.2MB) PDF Non-Fillable Form (0.7MB)
-
11B-604.8.1.2 Doors
Note that in Figure 11B-404.2.4.1 (c) the front approach requires 12 inches of strike-side clearance on the push side where a door has both a latch and a closer....
-
11B-604.8.1.2 Doors
Note that in Figure 11B-404.2.4.1 (c) the front approach requires 12 inches of strike-side clearance on the push side where a door has both a latch and a closer....
- Hoyer Presence Heavy-Duty Lift
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic and power-assisted doors are often used by designers to provide accessibility when door closer pressure would exceed the allowable opening force for interior or exterior doors....
-
703.4.2 Location
[ECTCR UFAS 4.30.6] EXCEPTION: Signs with tactile characters shall be permitted on the push side of doors with closers and without hold-open devices....
-
703.4.2 Location
EXCEPTION: Signs with tactile characters shall be permitted on the push side of doors with closers and without hold-open devices. ...
-
404.2.3 Doorways - Clear Width
Door closers and door stops shall be permitted to be 78 inches (1980 mm) minimum above the finish floor or ground....