Clear floor or ground space complying with 305.2 and 305.3 shall be provided at play components. Advisory 1008.4.2 Clear Floor or Ground Space....
Search Results "Character Spacing (VMS)"
Filters
Commonly Searched Documents
-
Clear Floor or Ground Space: ADA Standard Section 1008.4.2
-
Passing Spaces: ADA Standard Section 403.5.3
Section 403.5.3 covers the current ADA Standards for passing spaces that are part of an accessible route.
-
407.4.9 Emergency Communication
Tactile symbols and characters shall be provided adjacent to the device and shall comply with 703.2....
-
R410.10 Line Spacing
R410.10 Line Spacing. Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
-
407.4.9 Emergency Communication
Tactile symbols and characters shall be provided adjacent to the device and shall comply with 703.2. [ECTCR UFAS 4.10.14]...
-
407.4.9 Emergency Communication
Tactile symbols and characters shall be provided adjacent to the device and shall comply with 703.2....
-
810.6.2 Routes and Destinations
EXCEPTION: Where sign space is limited, characters shall not be required to exceed 3 inches (75 mm). Advisory 810.6.2 Routes and Destinations....
-
810.6.2 Routes and Destinations
EXCEPTION: Where sign space is limited, characters shall not be required to exceed 3 inches (75 mm). Advisory 810.6.2 Routes and Destinations....
-
11B-903.2 Clear floor or ground space
Clear floor or ground space complying with Section 11B-305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
Clear Floor Space: ADA Standard Section 410.3
Section 410.3 covers the current ADA Standards for clear floor space in platform lifts.
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both raised characters and braille. Raised characters shall be 2 inches (51 mm) high....
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both raised characters and Braille. Raised characters shall be 2 inches (51 mm) high....
-
810.6.2 Routes and Destinations
EXCEPTION: Where sign space is limited, characters shall not be required to exceed 3 inches (75 mm). Advisory 810.6.2 Routes and Destinations....
-
Figure 407.2.3.2 Car Designations on Jambs of Destination-Oriented Elevator Hoistway Entrances – Drawing from the U.S. Access Board
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both raised characters and braille. Raised characters shall be 2 inches (51 mm) high....
-
Incidental Spaces: ADA Standard Section 206.7.3
Section 206.7.3 covers scoping requirements in the most current ADA Standards for accessible routes to incidental spaces.
-
11B-810.6.2 Routes and destinations
Exception: Where sign space is limited, characters shall not be required to exceed 3 inches (76 mm). Advisory 11B-810.6.2 Routes and destinations....
-
703.5.4 Character Proportions
703.5.4 Character Proportions....
-
Clear Floor or Ground Space: ADA Standard Section 804.6.1
A clear floor or ground space complying with 305 shall be provided at each kitchen appliance. Clear floor or ground spaces shall be permitted to overlap....
-
407.2.3.1 Floor Designation
Floor designations shall be provided in both tactile characters and braille. Tactile characters shall be 2 inches (51 mm) high minimum....
-
11B-216.4.1 Exit doors
required by Chapter 10, Section 1011.4 at doors to exit passageways, exit discharge, and exit stairways shall comply with Sections 11B-703.1 _|Signs; General|_ 11B-703.2 _|Signs; Raised Characters...
-
11B-216.4.1 Exit doors
required by Chapter 10, Section 1013.4 at doors to exit passageways, exit discharge, and exit stairways shall comply with Sections 11B-703.1 _|Signs; General|_ 11B-703.2 _|Signs; Raised Characters...
-
Turning Space: ADA Standard Section 1005.5
At least one turning space complying with 304.3 shall be provided on fishing piers and platforms....
-
407.2.3.1 Floor Designation
Floor designations shall be provided in both tactile characters and braille. Tactile characters shall be 2 inches (51 mm) high minimum....
