The accessibility function button shall be located at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
Search Results "Seat Height"
-
11B-411.2.1.3.2 Touch screen call console arrangement
-
11B-703.6.3 Text descriptors
Text descriptors shall comply with Sections 11B-703.2 _|Signs; Raised Characters|_, 11B-703.3 _|Braille|_ and 11B-703.4 _|Installation Height and Location|_....
-
11B-411.2.1.3.2 Touch screen call console arrangement
The accessibility function button shall be located at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
-
11B-411.2.1.3.1 Keypad call console arrangement
The accessibility function button shall be located directly below the keypad at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
-
Individual Captioning Devices (Section-by-Section Analysis)
2 plus 1 per 50 seats over 100 seats or a fraction thereof 201 to 500 4 plus 1 per 50 seats over 200 seats or a fraction thereof...
-
§382.85(a)(2)
(2) If you use the “designated priority seats” mechanism of §382.83(a)(2) of this part, you must implement the requirements of this section as follows:...
-
Transfer Device
Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
TRANSFER DEVICE
[DSA-AC] Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
§ 38.29(d)
(d) Handrails and stanchions shall be sufficient to permit safe boarding, on-board circulation, seating and standing assistance, and alighting by persons with disabilities....
-
TRANSFER DEVICE
[DSA-AC] Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
§ 36.402(b)(1)
rehabilitation, reconstruction, historic restoration, changes or rearrangement in structural parts or elements, and changes or rearrangement in the plan configuration of walls and full-height...
-
Chapter 3: Building Blocks
Substantive revisions made in the final rule include: lowering the maximum height for side reaches from 54 to 48 inches (308.3.1) providing a limited exception from this...
-
1017.5 Tread Obstacles
This section requires obstacles to not exceed 1/2 inch in height measured vertically to the highest point....
-
604.6 Flush Controls
If plumbing valves are located directly behind the toilet seat, flush valves and related plumbing can cause injury or imbalance when a person leans back against them....
-
Accessible Route to Performance Areas
The proposed rule required that an accessible route be provided where a circulation path "directly connects" seating and performance areas (206.2.6)....
-
604.6 Flush Controls
If plumbing valves are located directly behind the toilet seat, flush valves and related plumbing can cause injury or imbalance when a person leans back against them....
-
604.6 Flush Controls
If plumbing valves are located directly behind the toilet seat, flush valves and related plumbing can cause injury or imbalance when a person leans back against them....
-
Accessible Round Table Style
If people using wheelchairs or other mobility aids will be seated at round tables, decrease the number of table settings by one or two to provide adequate space; for a five-foot round table...
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
accessible route between stories, an accessible route shall not be required to a mezzanine dining area where the mezzanine contains less than 25 percent of the total combined area for seating...
-
T602 Wheelchair Spaces
An exception has been added to T602.4 in the final rule that permits the space occupied by wheelchair footrests to be located under an adjacent seat, provided that the space under such seat...
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
accessible route between stories, an accessible route shall not be required to a mezzanine dining area where the mezzanine contains less than 25 percent of the total combined area for seating...
-
1132A.4, Item 1
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7 mm) of change in height between floor surfaces....
-
306.3.4 Clearance Reduction
inches (230 mm) and 27 inches (685 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches (150 mm) in height...