Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Mitered corners are ground and polished smooth Multiple reflective surfaces available Unit is equipped...
Search Results "Fire-Building Surface"
Commonly Searched Documents
- AJW Architectural Products U705 Series 16"W x 30"H Angle Frame Mirror w/ Mounted Shelf - Plate Glass Surface
-
4.3.11.4* Two-way Communication
The fire department or appropriate local authority may approve a location other than the primary entry....
-
[A] 101.4.4 Property maintenance
provisions of the International Property Maintenance Code shall apply to existing structures and premises; equipment and facilities; light, ventilation, space heating, sanitation, life and fire...
- Activar Construction Products Group Standard Vision Lite VLFIG
-
Counter Slope: ADA Standard Section 406.2
Section 406.2 covers the current ADA Standards for counter slope of adjoining gutters and road surfaces immediately adjacent to curb ramps.
-
Occupant Load
The number of persons for which the means of egress of a building or portion of a building is designed....
-
Parallel Approach: ADA Standard Section 904.4.1
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
What employment practices are covered by the ADA?
This includes not only hiring and firing, but job application procedures (including the job interview), job assignment, training, and promotions....
-
11B-206.4.8 Service entrances
If a service entrance is the only entrance to a building or to a tenancy in a facility, that entrance shall comply with Section 11B-404....
-
M305.2.7 Clearance (Section-by-Section Analysis)
Specifically, the Access Board sought input from the public in question 22, on whether transfer supports on diagnostic equipment could provide 1½ inches minimum clearance around the gripping surface...
- One Voice: Getting Started
- HEWI Range 250 Door Hardware
-
11B-406.5.6 Grade breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
1.9.1.4.3
1.9.1.4.3 The building department of every city, county, or city and county within the territorial area of its city, county or city and county, where private funds are utilized....
-
Chapter 4: Accessible Routes
Chapter 4 contains technical requirements for accessible routes (402) and the various components of such routes, including walking surfaces (403), doors, doorways and gates (404), ramps...
-
11B-303.5 Warning curbs
Abrupt changes in level exceeding 4 inches (102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning...
- Stanley FBB 266 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
- Stanley FBB 268 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
- Stanley FBB 264 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
- Stanley FBB 269 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
-
4. COMMON PATH OF TRAVEL ITEMS
These items include but are not limited to: • Primary building or facility entrance • Toilet and bathing facilities serving the area of alteration • Drinking fountains serving the...
-
[A] 101.4.4 Property maintenance
provisions of the International Property Maintenance Code shall apply to existing structures and premises; equipment and facilities; light, ventilation, space heating, sanitation, life and fire...
-
g-iv
[ADA Standards § 4.13.11 (2)(b)] Yes No Note: Fire doors are still considered to be accessible if they have the minimum opening force allowable by the appropriate administrative...