Call buttons and keypads shall be located within one of the reach ranges specified in 308, measured to the centerline of the highest operable part....
Search Results "Seat Location"
Filters
Commonly Searched Documents
-
407.2.1.1 Height
-
4.3.11.1(2)
(2) A portion of an exterior exit balcony located immediately adjacent to an exit stairway when the balcony complies with local requirements for exterior exit balconies....
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
Roughness Calculation
Foot Back Seat Foot Back Seat Foot Back 0.205 Engineered...
-
Overview
power-driven mobility devices; For example, a sports arena, on or after March 15, 2011, must tell an individual with a disability and his or her companions about the features of accessible seating...
-
11B-604.8.3 Coat hooks and shelves
Coat hooks shall be located within one of the reach ranges specified in Section 11B-308....
-
218 Transportation Facilities
These provisions are based on requirements located in Chapter 10 in the proposed rule....
-
904.2 Approach
All portions of counters required to comply with 904 shall be located adjacent to a walking surface complying with 403. Advisory 904.2 Approach....
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
11B-604.7.2 Disposal units
Sanitary napkin disposal units, if provided, shall comply with Section 11B-309.4 and shall be wall mounted and located on the sidewall between the rear wall of the toilet and the toilet...
-
1134A.3 Powder rooms
When the powder room is the only toilet facility located on an accessible level, it shall comply with the Option 2 Items listed above, plus all additional requirements located in Sections...
-
§ 38.159(a)(1) General
., lift or ramp) complying with paragraph (b) or (c) of this section and sufficient clearances to permit a wheelchair or other mobility aid user to reach a securement location....
-
1134A.3 Powder rooms
When the powder room is the only toilet facility located on an accessible level, it shall comply with the Option 2 Items listed above, plus all additional requirements located in Sections...
-
11B-810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with Section 11B-703.2 and shall be placed in uniform locations to the maximum extent practicable...
-
F220.1 General
Where automatic teller machines or self-service fare vending, collection, or adjustment machines are provided, at least one of each type provided at each location shall comply with 707....
-
220.1 General
Where automatic teller machines or self-service fare vending, collection, or adjustment machines are provided, at least one of each type provided at each location shall comply with 707....
-
§35.163 Information and Signage (Section-by-Section Analysis)
Paragraph (b) requires the public entity to provide signage at all inaccessible entrances to each of its facilities that directs users to an accessible entrance or to a location with information...
-
Takeform Fusion Signage Overheads Type C
Locations: Lobbies Corridors High traffic areas impeding visibility of wall signage Type C 44"w x 7"h Insert Size: 44"w x 5.5"h...
-
D. Election Day Compliance Review
materials provided to each in-precinct Election Coordinator, the Board will include a checklist of the temporary measures to be implemented during the voting period at each polling place location...
-
Sensory Impairments
Locate information on paging devices from JAN's SOAR at http://AskJAN.org/cgi-win/OrgQuery.exe?Sol493....
-
Elevator requirement to new dining area on the mezzanine of an existing facility
Let's also assume that the seating area of the mezzanine dining area you mention contains more than 25% of the total combined seating area and focus on the more difficult question you seem...
-
Receipts: ADA Standard Section 707.5.2
Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible. 2....
-
101.2 Scope
The provisions of this code shall apply to the construction, alteration, relocation, enlargement, replacement, repair, equipment, use and occupancy, location, maintenance, removal and demolition...
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings shall be located so the edge nearest the curb is 6 inches (152 mm) minimum and 8 inches (203 mm) maximum from the demarcation line at the face of the curb between the...
