For Doors: 1-3/8" to 2" Weight: 0.1 lbs. ANSI A156.16: L03222, L03172 Most of Rockwood's products are available in a wide variety of architectural finishes....
Search Results "Door Maneuvering Clearance"
Commonly Searched Documents
- Rockwood Manufacturing Company 620 UL Listed 160˚ Door Viewer For Doors 1-3/8" to 2"
-
4.1.6(3)(c)(iii)
For example, an elevator of 47 in by 69 in (1195 mm by 1755 mm) with a door opening on the narrow dimension, could accommodate the standard wheelchair clearances shown in Figure 4....
-
Visually IMpaired Accessible Keypad Door Lock
online and found a Yale key pad lock that claims to have a "Push button keypad option available for more tactile requirements, such as ADA compliance" Yale nexTouch™ Commercial Keypad Door...
- Accessible Parking Video Fact Sheet
-
Toilet Room Configuration
The 450 angle facilitated maneuvering by eliminating the need for sharp turns in small spaces....
-
Attachment J
Provide a lavatory with the bottom edge of the apron at least 29 inches above the finished floor; knee and toe clearances that comply with Fig. 31; hot water and drain pipes covered or otherwise...
-
2.3.3 Comparison of Dimensions with Standards and other Anthropometric Studies
• Wheelchair Turning Space to make a 90-Degree Turn: Compared to the maneuvering clearances required for performing a 90-degree (L-shaped) turn....
- Activar Construction Products Group Vision Lite with Privacy Door PDVSL
- Rockwood Manufacturing Company 619 UL Listed 160˚ Door Viewer For Doors 11/16" to 1-1/16"
-
304.2 Floor or Ground Surfaces
floor and ground spaces, turning spaces, and in similar spaces where people using wheelchairs and other mobility devices must park their mobility aids such as in wheelchair spaces, or maneuver...
- Figure 1003.3.1 Boat Slip Clearance – Drawing from the U.S. Access Board
- Figure 1003.3.2 Boarding Pier Clearance – Drawing from the U.S. Access Board
- Rockwood Manufacturing Company 622 UL Listed 190˚ Door Viewer For Doors 1-3/8" to 2-1/8"
-
304.2 Floor or Ground Surfaces
floor and ground spaces, turning spaces, and in similar spaces where people using wheelchairs and other mobility devices must park their mobility aids such as in wheelchair spaces, or maneuver...
-
11B-304.2 Floor or Ground Surfaces
floor and ground spaces, turning spaces, and in similar spaces where people using wheelchairs and other mobility devices must park their mobility aids such as in wheelchair spaces, or maneuver...
-
304.2 Floor or Ground Surfaces
floor and ground spaces, turning spaces, and in similar spaces where people using wheelchairs and other mobility devices must park their mobility aids such as in wheelchair spaces, or maneuver...
-
11B-304.2 Floor or Ground Surfaces
floor and ground spaces, turning spaces, and in similar spaces where people using wheelchairs and other mobility devices must park their mobility aids such as in wheelchair spaces, or maneuver...
-
5.4.6 Transfer Support Gripping Surface Cross Section and Clearances for M301, M302, and M305.2
5.4.6 Transfer Support Gripping Surface Cross Section and Clearances for M301, M302, and M305.2 Description: This provision prescribes a cross-sectional profile of the transfer support...
-
Portable Units [4.1.2(6)]
Where ramps are provided, it is important that required door clearances are available at the required level landing....
-
G. Chapter 6: Wheelchair Spaces and Securement Systems
The two areas in which the requirements in this chapter differ substantially from the proposed rule—wheelchair space maneuvering clearances and forward excursion barriers for rear-facing...
- Hill-Rom Liko® M220 / M230 Mobile Lift, Pediatric Video
-
Lift Compatibility (M301.4 and M302.4)
As discussed below, the technical criteria provide two options for accommodating portable floor lifts consistent with ANSI/AAMI HE75: clearance in the base or clearance around the base....
- Access Board: Tactile Sign Scoping