Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches 430 to 485 mm) above the load and unload surface....
Search Results "Surface Material"
-
Transfer Devices for Use with Amusement Rides: ADA Standard Section 1002.6
-
11B-1002.6 Transfer devices for use with amusement rides
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-1002.6 Transfer devices for use with amusement rides
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
Boat Slips: ADA Standard Section 1003.2.1
Where handrail extensions are provided on gangways or transition plates, the handrail extensions shall not be required to be parallel with the ground or floor surface. 7....
-
11B-1003.2.1 Boat slips
The vertical distance is 10 feet (3050 mm) between the elevation where the gangway departs the landside connection and the elevation of the pier surface at the lowest water level....
-
11B-1003.2.1 Boat slips
The vertical distance is 10 feet (3050 mm) between the elevation where the gangway departs the landside connection and the elevation of the pier surface at the lowest water level....
-
11B-407.4.10 Support rail
Support rails in elevator cabs are used in a different way than handrails along a walking surface such as a ramp or stairway. ...
-
904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
11B-705.1.1.3.2
Detectable warning surfaces shall provide a 70 percent minimum visual contrast with adjacent walking surfaces....
-
11B-407.4.10 Support rail
Support rails in elevator cabs are used in a different way than handrails along a walking surface such as a ramp or stairway....
-
5.4.1.1 Transfer Support Location Recommendation for Stretchers
5.4.1.1 Transfer Support Location Recommendation for Stretchers For Stretchers, the transfer surface is oriented along the long side of the surface....
-
4.5.3* CARPET
If carpet or carpet tile is used on a ground or floor surface, then it shall be securely attached; have a firm cushion, pad, or backing or no cushion or pad; and have a level loop, textured...
-
Data Analyses
Data Analyses Net energy consumption – the additional energy utilized during walking in excess of resting levels – was calculated for each surface....
-
Interactive Illuminated Models
Interactive Illuminated Models Another promising new development expands on the concept of touch sensitive talking models by projecting light onto the model’s 3D surface....
-
ALIGNMENT OF 19-INCH RECOMMENDATION WITH ACCESS BOARD PROPOSED RULEMAKING
In its proposed rule, the Access Board proposed that the “height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured...
-
Pressalit Care PLUS Support Arm Height and Sideways Adjustable Swing Grab Bar
Materials: The arms are construced of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core....
-
Pressalit Care PLUS Support Arm Height Adjustable Swing Grab Bar
Materials: The arms are constructed of 10-micrometre anodized aluminum, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core....
-
National Eye Health Education Program (NEHEP) Low Vision: Resources
Low Vision: Resources Find NEHEP low vision materials that you can print and download to support your education efforts....
-
Bradley 2-Station Express Crescent Lavatory System CRS-2
access panel/ trap cover required) Serves 1 - 2 users at a time Sleek, low-profile, contemporary design, Only 38" High Constructed of vandal resistant Terreon or TerreonRE Solid Surface...
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-P
About Commercial Thresholds Pemko manufactures thresholds in several materials to meet customer needs. Extruded Aluminum thresholds are manufactured of tempered aluminum, 6063-T6....
-
PEMKO 7" Half Saddle/Offset Saddle Threshold No. 2727
About Commercial Thresholds Pemko manufactures thresholds in several materials to meet customer needs. Extruded Aluminum thresholds are manufactured of tempered aluminum, 6063-T6....
-
PEMKO 5 1/2" Half Saddle/Offset Saddle Threshold No. 158
About Commercial Thresholds Pemko manufactures thresholds in several materials to meet customer needs. Extruded Aluminum thresholds are manufactured of tempered aluminum, 6063-T6....
-
Landscape Forms Inc. Chase Park Bench Collection
Chase Park seats may be specified as two- or three-seat units All units are backed Intermediate arms may be specified for multiple seat units Bench materials consist of cast aluminum...
-
Wikk Industries Inc. Push Plate Narrow Switches
Type 304 Stainless Steel in Brushed Satin Finish US32D (630) Single Pole Double Throw (S.P.D.T.) momentary switch has 3/4” (19mm) mounting depth Between Use with Jsb mount and Special Material...
