Section 306.2.4 covers the current ADA Standards for additional clearances for toe space.
Search Results "Clear Ground Space"
-
Additional Clearance: ADA Standard Section 306.2.4
-
1003.2.13.2 Enclosed exit stairways
An enclosed exit stairway, to be considered part of an accessible means of egress, shall have a clear width of 48 inches (1219 mm) minimum between handrails and shall either incorporate...
-
Equivalent Facilitation
Department, in consultation with the Access Board, has granted equivalent facilitation for a design similar to the ADAAG specification but having a dome base diameter of 1.325mrn and a spacing...
-
Kompan, Inc. Elements Play Structures Ridge ELE500003
The Ridge supports traditional playground games such as “Do-not-touch the ground” as all activities are interconnected....
-
F221.2.3.2 Vertical Dispersion
Wheelchair spaces shall be dispersed vertically at varying distances from the screen, performance area, or playing field....
-
F202.6.1 Joint use Areas
Joint use areas serving the leased space shall comply with F202.6....
-
5.9.2 Standing Supports on Ramped Entry Raised Platforms with Wheelchair Spaces
5.9.2 Standing Supports on Ramped Entry Raised Platforms with Wheelchair Spaces....
-
226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with 902....
-
Polling places that cannot be remediated with temporary measures:
Parking: Signage for a van accessible parking space is not provided (1991 ADA Stds 4.6.4; 2010 ADA Stds 502.6)....
-
1007.3 Enclosed exit stairways
An enclosed exit stairway, to be considered part of an accessible means of egress, shall have a clear width of 48 inches (1219 mm) minimum between handrails and shall either incorporate...
-
Passenger Loading Zones
Accessible passenger loading zones must have an access aisle that is 60 inches wide minimum and extends the full length of the vehicle pull-up space....
-
M305.3.1.2 Diagnostic Equipment Containing a Wheelchair Space
On diagnostic equipment containing wheelchair spaces with one entry that also serves as the exit, the length of the gripping surface of horizontal standing supports shall be equal to or...
-
11B-206.5.3 Transient lodging facilities
passage into and within guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall comply with Section 11B-404.2.3 _|Doors, Doorways, and Gates; Clear...
-
Technical Requirements
[See subsections ...]
-
§ 36.302(f)(9)(i)
If there is an insufficient number of seats for all members of a party to sit together, seats shall be provided that are as close as possible to the wheelchair spaces. ...
-
§ 35.138(i)(1)
If there is an insufficient number of seats for all members of a party to sit together, seats shall be provided that are as close as possible to the wheelchair spaces. ...
-
11B-221.2.3.2 Vertical dispersion
Wheelchair spaces shall be dispersed vertically at varying distances from the screen, performance area, or playing field....
-
11B-221.2.3.2 Vertical dispersion
Wheelchair spaces shall be dispersed vertically at varying distances from the screen, performance area, or playing field....
-
11B-812.7 Access aisle
Two vehicle spaces shall be permitted to share a common access aisle....
-
Wheelchair Securement Systems
The Access Board’s existing guidelines require buses, OTRBs, and vans to provide wheelchair securement systems that comply with specified technical requirements at each wheelchair space....
-
11B-226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with Section 11B...
-
11B-226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with Section 11B...
-
11B-226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with Section 11B...
-
Q5.) What dimensions and conditions can practitioners reasonably consider to be compliant when the conditions, as constructed, do not meet the technical requirements exactly and there are no official, published, industry-developed tolerances?
A5.) This is the most difficult question and the most subject to varying opinions. Sloped concrete and asphalt surfaces are an excellent example of this problem. To our...
