section by using the existing assistive listening receivers that the public accommodation is already required to provide at its movie theaters in accordance with Table 219.3 of the 2010 Standards...
Search Results "1991 Standards"
-
§ 36.303(g)(4)(ii)
-
At what types of property/sites must the ADA requirements be met?
Also, under the American with Disabilities Act there is a general obligation to provide accessible EVCS; however, specific requirements for EVCS have not been adopted in the ADA Standards...
-
Section 2. Building entrance on an accessible route
A building entrance that complies with ANSI A117.1-1986 (see Section 5, Requirement 1 of these guidelines) or a comparable standard complies with the requirements of this paragraph....
-
D1
[ADA Standards § 4.1.3(1)] Yes No Notes: If this entrance is not the main entrance, it needs to be kept unlocked when other shelter entrances are unlocked....
-
§ 35.151(b)(3)
(3) Alterations to historic properties shall comply, to the maximum extent feasible, with the provisions applicable to historic properties in the design standards specified in § 35.151(c...
-
Bus boarding and alighting areas
(DOT ADA Standard 810.2.)...
-
H12
[ADA Standards §§ 4.23.7; 4.27.2; 4.2.5 and Fig 5; 4.2.6 and Fig 6] Yes No...
-
§ 36.303(g)(4)(ii)
section by using the existing assistive listening receivers that the public accommodation is already required to provide at its movie theaters in accordance with Table 219.3 of the 2010 Standards...
-
Can curbs be used to indicate areas with less than 80” of vertical clearance?
The standards specify a maximum height (27”) for the leading edge of barriers so they are within cane sweep, but a minimum height is not specified....
-
§1193.51(d) TTY connectability
Products which provide a function allowing voice communication and which do not themselves provide a TTY functionality shall provide a standard non-acoustic connection point for TTYs....
-
TTY
Machinery or equipment that employs interactive text based communications through the transmission of coded signals across the standard telephone network....
-
§ 35.151(e) Social service center establishments.
center establishments that provide either temporary sleeping accommodations or residential dwelling units that are subject to this section shall comply with the provisions of the 2010 Standards...
-
14) Carpet and carpet tile
14) Carpet and carpet tile ADAAG: Same standards for carpet and carpet tile: maximum pile height of 1/2" (§4.5.3). UFAS: Carpet must have maximum pile height of 1/2"....
-
ACCESSIBLE MEANS OF EGRESS
[2010 ADA Standards 106.5] Accessible Means of Egress....
-
409.1 General
residential dwelling unit required to provide mobility features complying with 809.2 through 809.4 shall comply with 409 and with ASME A17.1 (incorporated by reference, see "Referenced Standards...
-
M201.2 General Exception
Medical diagnostic equipment shall not be required to comply with one or more applicable requirements in the MDE Standards in the rare circumstances where compliance would alter diagnostically...
-
[A] BUILDING
The accessibility standards generally apply to buildings and facilities....
-
Sections 4.2 Through 4.35 (Preamble, Section-by-Section Analysis)
The technical specifications are the same as the 1980 version of ANSI A117.1 standard, except as noted in the text by italics....
-
New Construction and Alterations
New Construction and Alterations Businesses whose facilities were built or altered since the ADA went into effect must comply with the ADA Standards for Accessible Design so that the...
-
Accessible Miniature Golf Course Holes
Sections 239.2 and 1007.3 of the 2010 Standards require at least fifty percent (50%) of golf holes on miniature golf courses to be accessible, including providing a clear floor or ground...
-
6.11
6.11 Nothing in Section 6 of the Consent Order shall limit the placement of any additional wheelchair spaces required by state or local codes beyond those mandated under the ADA Standard...
-
12101(a)(5)
architectural, transportation, and communication barriers, overprotective rules and policies, failure to make modifications to existing facilities and practices, exclusionary qualification standards...
-
a. Federal Laws
This defense is not valid, however, if the Federal standard does not require the discriminatory action, or if there is a way that an employer can comply with both legal requirements....
-
243 Shooting Facilities with Firing Positions
243 Shooting Facilities with Firing Positions Sections 243 and 1010 of the 2010 Standards require an accessible turning space for each different type of firing position at a shooting...