ATMs and vending machines, as well as detailed requirements for fixed equipment that is not addressed by name in the current Standards, such as depositories, change machines, and fuel dispensers...
Search Results "Dispenser Location"
Filters
Commonly Searched Documents
-
Equipment and furniture.
-
B. Agreement of the Parties
Ellerbe shall design these facilities such that all or substantially all of the wheelchair seating locations in the facility provide persons with physical disabilities lines of sight that...
-
Access to Programs and Services in Existing Facilities
A social service agency located in an inaccessible facility can make arrangements to meet with an applicant or client with a mobility disability at an alternate location that is accessible...
-
Where must curb ramps be provided?
Curb ramps must be located to ensure a person with a mobility disability can travel from a sidewalk on one side of the street, over or through any curbs or traffic islands, to the sidewalk...
-
11B-703.6.1 Pictogram field
Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field. ...
-
707.5.2 Receipts
Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible. 2....
-
1009.3.2 Submerged Depth
Where landings are required by 405.7, at least one landing shall be located 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
-
11B-707.5.2 Receipts
Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible. 2. ...
-
11B-217.4.1 Bank requirement
[2010 ADAS] EXCEPTION: TTYs shall not be required at banks of telephones located within 200 feet (61 m) of, and on the same floor as, a bank containing a public TTY. ...
-
307.4 Vertical Clearance
The leading edge of such guardrail or barrier shall be located 27 inches (685 mm) maximum above the finish floor or ground....
-
M302.4.1 Clearance in Base
Equipment components are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
M301.4.1 Clearance in Base
Components of diagnostic equipment are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
102 Dimensions for Adults and Children
In addition, technical requirements are also provided based on children’s dimensions and anthropometrics for drinking fountains, water closets and other elements located in toilet compartments...
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
1015.3 Viewing Space
Each distinct viewing location shall provide a viewing space adjacent to the clear ground space required by 1015.2 through which the point of interest is viewable....
-
Fixtures
None of these fixtures shall be located within the required water closet clearance except as allowed by the Exception to TAS 604.3.2....
-
Protrusions
Where a wheelchair space is located on a ride, nothing may protrude into the front of the wheelchair space 9 inches from the floor....
-
707.5.2 Receipts
Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible. 2....
-
5.4.2.1 Transfer Support Length Recommendation for Stretchers
Figure 5.4.2.1 Transfer Support Location – Side View (SOURCE: Stryker Medical)...
-
Pit Toilets [F213.1, Exception]
F247.4.4 requires routes connecting pit toilets located along a trail to comply with the technical requirements in 1017 only if the trail complies with 1017....
-
Picnic Units With Mobility Features [F245.2.1 and F245.2.2]
Entities should provide information on the location of picnic units with mobility features on Web sites, in brochures, and at bulletin boards or information kiosks at the picnic facility...
-
There does not seem to be a distinction between different EVCS standards (Level 1, Level 2, DC CHAdeMO, DC CCS, and Tesla). Does the schedule defined in Table 11B-228.3.2.1 make a distinction between the different types of EVSE standards or are that all considered to equivalently be an EVCS?
Where different types of EVCS service are provided at a location, the code enforcement official must determine the applicability of Table 11B-228.3.2.1....
-
Signs
They must also meet specific requirements for mounting location, color contrast, and non-glare surface....
-
Facility sell-out. (Section-by-Section Analysis)
Blocks of seats should be released in stages, and should include tickets in a range of price categories and locations that is representative of the range of seating that remains available...