To measure the slope of the curb ramp’s flared side, place a level on the flared side near the edge of the curb. The level should be placed so that it is parallel to the curb....
Search Results "Commercial Place of Public Amusement"
-
9.b [§ 4.7.5]
-
Section 9, Accessible Transient Lodging (Section-By-Section Analysis and Response to Comments)
Section-By-Section Analysis and Response to Comments) Section 9 addresses two types of transient lodging: hotels, motels, inns, boarding houses, dormitories, resorts, and other similar places...
-
Table of Contents
Fuel Dispensers 229 Windows 230 Two-Way Communication Systems 231 Judicial Facilities 232 Detention Facilities and Correctional Facilities 233 Residential Facilities 234 Amusement...
-
810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with 703.2 and shall be placed in uniform locations to the maximum extent practicable....
-
810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with 703.2 and shall be placed in uniform locations to the maximum extent practicable....
-
b. Telephone Communications
Public entities that use telephones must provide equally effective communication to individuals with disabilities....
-
Reasonable Modification
Public entities must reasonably modify their rules, policies, and procedures to avoid discriminating against people with disabilities.19 Requiring a driver’s license as proof of identity...
- Glenn Dea
- Thinking Out of the Box Engineering Applications (TOBEA)
-
General: ADA Standard Section 707.1
Place accessible gates and fare vending machines in close proximity to other accessible elements when feasible so the facility is easier to use....
-
11B-411.2.3.2 Car designation signs
Braille complying with Section 11B-703.3 shall be placed below the corresponding raised characters. Applied plates are acceptable if they are permanently fixed to the jamb....
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Color coding shall be placed immediately above the control button. Control buttons shall be located no higher than 48 inches (1219 mm) above the ground surface adjacent to the pole....
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Color coding shall be placed immediately above the control button. Control buttons shall be located no higher than 48 inches (1219 mm) above the ground surface adjacent to the pole....
-
11B-411.2.3.2 Car designation signs
Braille complying with Section 11B-703.3 shall be placed below the corresponding raised characters. Applied plates are acceptable if they are permanently fixed to the jamb....
-
1. GENERAL
In general, worldwide, all facilities designed, constructed, altered, leased, or funded by DoD that are open to the public, or to limited segments of the public, or that may be visited by...
-
11B-809.10.7.3 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Where water closets are not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom shall...
-
11B-224.1 General
Access Board's Note To Reader after Section 224.5 for ADA scoping requirements of Title III §36.406(c) Standards for New Construction and Alterations; Places of Lodging, and also Title II...
-
11B-809.10.7.3 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Where water closets are not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom shall...
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
- Cal-Royal CR6000 Series Digital Touch Screen Door Lock
- Cal-Royal Apollo ALC Series Cylindrical Lockset
- ClickAndGo Navigation Wayfinding Technology
-
810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with 703.2 and shall be placed in uniform locations to the maximum extent practicable....
