Pool lift seats that consist of materials that resist corrosion and provide a firm base to transfer will be usable by a wider range of people with disabilities....
Search Results "Surface Material"
-
11B-1009.2 Pool lifts
-
382.127 What procedures apply to the stowage of battery-powered mobility aids?
DOT’s Pipeline and Hazardous Materials Safety Administration (PHMSA) has issued a special permit which may affect procedures for handling power wheelchairs (see PHMSA “Special Permit 14548...
-
702.1 Approved IBR Standards
For information on the availability of this material at NARA, call 202–741–6030 or go to https://www.archives.gov/federal-register/cfr/ibr-locations.html....
-
C201.5 Design, Development and Fabrication (Section-by-Section Analysis)
We do not include this provision in the proposed 255 Guidelines because it is non-mandatory, advisory material only....
-
4.1.1(4) Temporary Structures
Structures, sites and equipment directly associated with the actual processes of construction, such as scaffolding, bridging, materials hoists, or construction trailers are not included....
-
4.4.3 Backrest and Armrest
The structural strength of backs, armrests, and mounting devices shall comply with section 903.6 of the ABAAS, which states: “Allowable stresses shall not be exceeded for materials used...
-
DEFINITIONS
This section is not a material term of this Agreement....
-
11B-1009.2 Pool lifts
Pool lift seats that consist of materials that resist corrosion and provide a firm base to transfer will be usable by a wider range of people with disabilities....
-
1009.2 Pool Lifts
Pool lift seats that consist of materials that resist corrosion and provide a firm base to transfer will be usable by a wider range of people with disabilities....
-
1134A.6 Showers
The floor surfaces shall be of Carborundum or grit-faced tile or of material providing equivalent slip resistance. 3. Floor space....
-
904.4.1 Parallel Approach
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
11B-303.5 Warning curbs
Abrupt changes in level exceeding 4 inches (102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning...
-
904.4.1 Parallel Approach
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
- Bradley 3 Station Express Deck Lavatory System EXD-3N
- Compliance Signs Parking Sign PKE-20710
-
11B-1009.5.4 Transfer steps
The surface of the bottom tread shall extend to a water depth of 18 inches (457 mm) minimum below the stationary water level. Advisory 11B-1009.5.4 Transfer steps....
-
11B-1009.5.4 Transfer steps
The surface of the bottom tread shall extend to a water depth of 18 inches (457 mm) minimum below the stationary water level. Advisory 11B-1009.5.4 Transfer steps....
-
Transfer Height
Transfer Height Ride seats designed for transfer must be between 14 and 24 inches above the load and unload area surface....
-
R304.5.2 Grade Breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
11B-406.5.8 Counter slope
Counter slopes of adjoining gutters and road surfaces immediately adjacent to and within 24 inches (610 mm) of the curb ramp shall not be steeper than 1:20....
-
M302.3.1 Transfer Supports (Section-by-Section Analysis)
Based on the restructure of the transfer surface provisions, described above in Section IV.B.1.b....
- EZ-ACCESS Transitions® Angled Entry Ramp
-
Auxiliary aids and services (Section-by-Section Analysis)
The Department has changed the phrase used in the proposed rules, "orally delivered materials," to the statutory phrase, "aurally delivered materials," to track section 3 of the ADA and...
-
1012.5 Slope
The slope of the surface of parking spaces and pull-up spaces shall not be steeper than 1:48 in any direction....