The protected area within which a drinking fountain is located shall be 32 inches (813 mm) wide minimum and 18 inches (457 mm) deep minimum, and shall comply with Section 11B-305.7....
Search Results "Play Area"
-
11B-602.9 Pedestrian protection
- BEA Inc. PBS2G Series 4.5" Square Push Plate (Push to Open)
- Reese Enterprises, Inc. PERFEC MATv * Aluminum Hinge
-
Accessible Routes in Dwelling Units with Mobility Features
Sections 4.34.1 and 4.34.2 of the UFAS require the living area, kitchen and dining area, bedroom, bathroom, and laundry area, where provided, in covered dwelling units with mobility features...
-
Signs
Section 216.10 of the 2010 Standards requires each covered assembly area to provide signs at each auditorium to inform patrons that assistive listening systems are available....
-
G. Chapter 6: Wheelchair Spaces and Securement Systems
With the exception of two areas, this chapter has been neither significantly reorganized nor substantively revised from the proposed rule....
-
4.33.3* Placement of Wheelchair Locations
Wheelchair areas shall be an integral part of any fixed seating plan and shall be provided so as to provide people with physical disabilities a choice of admission prices and lines of sight...
-
Visual Alarms [4.28.3]
Visual alarms are required in hallways, lobbies, restrooms, and any other general usage and common use areas, such as meeting and conference rooms, classrooms, cafeterias, employee break...
-
3.4 Staff-Related Barriers and Solutions
Simple/Low cost Involved / High cost Staff is hard to find when you need help Work out a signal with one or two staff members who will be in the area...
-
III-4.2200 Specialties
It is not considered discriminatory for a public accommodation with a specialty in a particular area to refer an individual with a disability to a different public accommodation if --...
-
§ 38.159(d)(2) Location and size
The securement system shall be placed as near to the accessible entrance as practicable and shall have a clear floor area of 30 inches (760 mm) by 48 inches (1220 mm)....
-
11B-219.3 Receivers
Receivers complying with 706.2 shall be provided for assistive listening systems in each assembly area in accordance with Table 219.3....
-
Exception 8
to provide, priority should be given to those elements that will provide the greatest access in the following order: An accessible entrance; An accessible route to the altered area...
-
11B-219.3 Receivers
Receivers complying with 706.2 shall be provided for assistive listening systems in each assembly area in accordance with Table 219.3....
-
11B-219.3 Receivers
Receivers complying with 706.2 shall be provided for assistive listening systems in each assembly area in accordance with Table 219.3....
-
General: ADA Standard Section 234.1
Section 234.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for amusement rides.
-
11B-234.3 Minimum number
These rides are not exempt from the other provisions in Section 11B-234 requiring an accessible route to the load and unload areas and to the ride....
-
11B-201.1 Scope
All areas of newly designed and newly constructed buildings and facilities and altered portions of existing buildings and facilities shall comply with these requirements....
-
11B-234.3 Minimum number
These rides are not exempt from the other provisions in Section 11B-234 requiring an accessible route to the load and unload areas and to the ride....
-
11B-201.1 Scope
All areas of newly designed and newly constructed buildings and facilities and altered portions of existing buildings and facilities shall comply with these requirements....
-
Sec.36.403(c)(1)(iii)
(iii) Redesigning the assembly line area of a factory; or...
-
Sec.36.403(c)
(c) Alterations to an area containing a primary function....
-
1.1.3.2, Item 14.6
Wildland-urban interface fire areas....
-
§ 36.403(c)(1)(iii)
(iii) Redesigning the assembly line area of a factory; or...