The basic criteria for designating a building or property as a qualified historic building or facility are administered by the National Register program of the National Park Service....
Search Results "NFSI: National Floor Safety Institute"
-
11B-202.5 Alterations to qualified historic buildings and facilities
-
11B-202.5 Alterations to qualified historic buildings and facilities
The basic criteria for designating a building or property as a qualified historic building or facility are administered by the National Register program of the National Park Service....
-
You must provide timely access to the same information given to other passengers for those who are deaf, blind
This includes, but is not limited to, information concerning gate assignments, delayed flights, and safety. [Secs. 382.45(c) and 382.47]...
-
General [4.10.1]
Elevators must comply with the American Society of Mechanical Engineers (ASME) Safety Code for Elevators and Escalators (ASME A17.1‒1990)....
-
Bicycle Trailers
Safety recommendations in several sources include installing a highflying fluorescent warning flag to increase visibility, allowing plenty of stopping distance, and using caution when maneuvering...
-
4.20.4 Grab Bars
Because these positional changes were deemed safety risks for older adults, grab bars that would permit older adults to raise and lower themselves were not included in most bathtub designs...
-
382.69 What requirements must carriers meet concerning the accessibility of videos, DVDs, and other audio-visual presentations shown on aircraft to individuals who are deaf or hard of hearing?
This section requires carriers to ensure that all new videos, DVDs, and other audio-visual displays played on aircraft for safety purposes, and all such audio-visual displays played on aircraft...
-
Height: ADA Standard Section 903.5
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
Maximum Depth: ADA Standard Section 306.3.2
Section 306.3.2 covers the current ADA Standards for the maximum depth for knee clearance.
-
11B-306.3.2 Maximum depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (229 mm) above the finish floor or ground....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
11B-306.3.2 Maximum depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (229 mm) above the finish floor or ground....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
Centers for Disease Control and Prevention (CDC)
CDC works 24/7 to protect America from health, safety and security threats, both foreign and in the U.S....
-
§382.151(e)
power to overrule the decision of any other personnel, except that the CRO is not required to be given authority to countermand a decision of the pilot-in-command of an aircraft based on safety...
-
D. Unfunded Mandates Reform Act
Act does not apply to proposed or final rules that enforce constitutional rights of individuals or enforce statutory rights that prohibit discrimination on the basis of race, color, sex, national...
-
The Smith-Fess Act
. — National Library of Medicine...
-
§1630.1(a) Purpose
The ADA as amended, and these regulations, are intended to provide a clear and comprehensive national mandate for the elimination of discrimination against individuals with disabilities,...
-
Lift-U® LU12 Step/Platform Onboard Lift
When deployed, the lift extends horizontally with the steps forming the platform and lowers to ground level, or raises to bus floor level....
-
Height: ADA Standard Section 902.3
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
11B-809.10.7.4 Seat height
Water closet seats shall be 15 inches (381 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat above the finish floor....
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
