(i) Supervisors and managers may be informed regarding necessary restrictions on the work or duties of the employee and necessary accommodations;...
Search Results "Kitchen Work Surface"
Filters
Commonly Searched Documents
-
§1630.14(b)(1)(i)
-
American Standard Yorkville 1.6 gpf Right Height Elongated Pressure Assisted Toilet
applications Fully glazed 2-1/8" trapway 10" x 12" water surface area Close-coupled flushometer tank Chrome metal trip lever Speed Connect® tank/...
-
American Standard Cadet 1.6 gpf Right Height Elongated Pressure Assisted Toilet
Combination bowl and tank, less seat 12" (305mm) rough EverClean® Surface Elongated bowl Pressure-assisted siphon jet flush action 16-1/2" rim height...
-
§382.57(c)(6)(iv)(A) Contrast
Function keys must contrast visually from background surfaces. Characters and symbols on key surfaces must contrast visually from key surfaces....
-
505 Handrails
Specifications for handrails in section 505 apply to those provided at ramps, stairs, and along walking surfaces....
-
11B-406.5.8 Counter slope
Counter slopes of adjoining gutters and road surfaces immediately adjacent to and within 24 inches (610 mm) of the curb ramp shall not be steeper than 1:20....
-
§ 382.57(c)(6)(iv)(A) Contrast
Function keys must contrast visually from background surfaces. Characters and symbols on key surfaces must contrast visually from key surfaces....
-
707.6.1 Input Controls
Where provided, key surfaces not on active areas of display screens, shall be raised above surrounding surfaces....
-
705.1.3 Contrast
Detectable warning surfaces shall contrast visually with adjacent walking surfaces either light-on-dark, or dark-on-light....
-
705.1.3 Contrast
Detectable warning surfaces shall contrast visually with adjacent walking surfaces either light-on-dark, or dark-on-light....
-
5.4.1.1 Transfer Support Location for Stretchers
The transfer surface for stretchers should be oriented along the long side of the surface....
-
R409.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 38 mm (1.5 in) minimum....
-
1193.23(b)(3) (Advisory Guidance)
Paragraph (b)(3) Working Cooperatively with Appropriate Disability-Related Organizations 1....
-
Acknowledgements
Acknowledgements The National Trail Surfaces Study has taken a number of turns over the past several years....
-
10. Prescription Drug Container Labels
A provision of the act (section 904) directs the Board to convene a working group to develop best practices for making information on prescription drug container labels accessible to people...
-
Stabilizer
the surface....
-
How is slip resistance measured?
The coefficient of friction between the two surfaces is the ratio of the horizontal and vertical forces required to move one surface over another to the total force pressing the two surfaces...
-
Features of Accessible Exam Tables
Removable/adjustable support rails with continuous gripping surfaces 2. 30” X 48” minimum clear floor space adjacent to exam table and adjoining accessible route 3....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
§104.14(d)(1)
(1) Supervisors and managers may be informed regarding restrictions on the work or duties of handicapped persons and regarding necessary accommodations;...
-
Important Tools for Accessible Recreation
The following tools work together with the accessibility guidelines when accessible recreation facilities and programs are being developed and managed....
-
Practicable
Practicable means work that can be completed within the limits of the applicable conditions for exception and results in a useful improvement for all....
-
§40.3(b)(2)
(2) The alteration of an existing residential structure to the extent that the alteration does not involve work which is related to the standards of this part; or...
-
Cross Slope [1016.7.2]
Cross slope is the side-to-side slope of the surface of an ORAR....
