For many patients who use mobility devices, independent transfer is possible only if the height of the transfer surface is at or near the seat height of their mobility device....
Search Results "Door Height"
-
Transfer Surface Height (M301.2.1 and M302.2.1)
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
Rockwood Manufacturing Vertical Rod Cover BFRC12
Height: 12" Width: 3-1/4" Projection: 1-5/8" Weight: 0.9 lbs....
-
Rockwood Manufacturing Company BFRC24 Vertical Rod Cover
Height: 24" Width: 3-1/4" Projection: 1-5/8" Weight: 1.8 lbs....
-
M305.2.8 Fittings
Transfer supports shall not rotate within their fittings when in place for transfer.
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum.
-
M305.2.7 Clearance (Section-by-Section Analysis)
In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support. However, in the preamble to the MDE NPRM the Access Board...
-
M305.2.8 Fittings (Section-by-Section Analysis)
The MDE NPRM proposed to require that transfer supports not rotate in their fittings (proposed M305.2.3). Five commenters addressed this provision. Four of the commenters disagreed...
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
5.4.10 Transfer Support Fittings Recommendations for M301 and M302 Description: To ensure safe and effective transfers, transfer supports must not rotate within their fittings...
-
5.4.10 Transfer Support Fittings for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.10 Transfer Support Fittings for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position. The transfer supports shall not rotate when locked in place for patient...
-
III. CONCLUSION
For the foregoing reasons, neither Section 904.4.1 nor its exception requires clear counter space at sales and service counters subject to the ADA’s requirements.
-
M305.2.3 Fittings
Transfer supports shall not rotate within their fittings.
-
Sargent 7800 Mortise Lock with Push/Pull Trim Hardware
Stile Requirement - Minimum of 5 inches (125mm) Door Thickness 1 3/4 inches (44mm) to 2 inches (57mm) standard with adaptable spindle. Easy installation....
-
Hager Companies Three Knuckle - Full Mortise Swing Clear Hinge AB7001
Three Knuckle - Full Mortise Swing Clear Hinge AB7001 - Concealed Anti-Friction Bearing - Standard Weight Description: - For square edge doors - ANSI A8122 - Non-rising removable...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Hager Companies Five Knuckle - Half Surface Swing Clear Hinge BB1270
- For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes: - USP, US10, US10A, US10B, US26D Note: - When opened 90°, door...
-
Hager Companies Three Knuckle - Full Surface Swing Clear Hinge AB7523
- For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes: - USP, US10, US10A, US10B, US26D Note: - When opened 90°, door...
-
Hager Companies Five Knuckle - Full Surface Swing Clear Hinge BB1266
- For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes: - USP, US10, US10A, US10B, US26D Note: - When opened 90°, door...
-
Hager Companies Three Knuckle - Half Surface Swing Clear Hinge AB7534
- For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes: - USP, US10, US10A, US10B, US26D Note: - When opened 90°, door...
-
Figure 407.4.1(b) Elevator Car Dimensions – Drawing from the U.S. Access Board
