A maximum slope of 2% is required in all directions for both the space and access aisle since level surfaces are important for wheelchair transfer to and from vehicles....
Search Results "Maximum Dimension"
-
Parking Spaces [4.6.3]
-
2. a. Accessible route into and throughout the facility
The accessible route shall, to the maximum extent feasible, coincide with the route for the general public....
-
Location [§208.3]
A maximum travel distance is not specified in the Standards....
-
11B-704.4.1 Height
wheelchair accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum...
-
11B-704.4.1 Height
wheelchair accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2. ...
- Better Living Clear Choice Soap and Shower Dispenser 2
- Bobrick Koala Kare Horizontal, Stainless Steel Wall Mounted Baby Changing Station KB110-SSWM
- Better Living LINEA Luxury Double Dispenser
- Pilot Rock Smoker's Stack Ash Tray
- American Standard Brandon Centerset Bathroom Faucet
- SafePath EntryLevel™ Landings
-
1115B.4.1, Item 1
The centerline of the accessible water closet shall be 16 inches (405 mm) minimum and 18 inches (457 mm) maximum from the side wall or partition....
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
The gripping surface of the transfer support should be located 1 ½ inches maximum measured horizontally from the adjacent edge of the transfer surface....
-
Alterations to Existing Facilities
Alterations to Existing Facilities The draft guidelines required alterations to existing facilities to comply with the requirements for new construction to the maximum extent feasible...
-
24. Educational setting
Section 104.34 prescribes standards for educating handicapped persons with nonhandicapped persons to the maximum extent appropriate to the needs of the handicapped person in question....
-
Element-by-Element Safe Harbor for Existing Facilities
For example: The 1991 Standards allowed light switches, thermostats, and other controls to be installed at a maximum height of 54 inches....
-
Trailhead Signs
minimum the following information: Trail name Length of the trail Type of surface on the trail Typical and minimum trail tread width Typical and maximum...
-
III-8.4000 Suit by the Attorney General
All violations found in the first suit against a covered entity are considered to be the first violation, so that the maximum penalty that may be assessed in that suit is $50,000....
-
Required Means of Egress [IBC §1007.1 (2003), §1003.2.13 (2000)]
For example, a business occupancy with no more than 30 occupants and a maximum exit access travel distance of 75 feet is permitted to have a single means of egress....
-
8. Batteries
uses a ventilator, respirator, CPAP machine or FAA-approved POC to bring an adequate number of fully charged batteries onboard to operate the device for not less than 150% of the expected maximum...
-
Uniform Federal Accessibility Guidelines (UFAS)
“Technical provisions” give you the components, dimensions and installation details of the accessible elements. For Example....
-
Digital Human Models
Such models can represent an individual of specific dimension, or can represent whole groups of individuals....