(1) Single-level rail passenger coaches and food service cars (other than single-level dining cars) shall comply with §§38.113 through 38.123 of this part....
Search Results "Ground Level Play Component"
2010 ADA Definition
Ground Level Play Component: A play component that is approached and exited at the ground level.
Filters
Commonly Searched Documents
-
§ 38.111(a)(1)
-
Cole & Associates, Inc.
Our strength is grounded in our client relationships and the value we bring to projects through our multi-disciplined approach....
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADAS] 502.6 Identification. ...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADAS] 502.6 Identification. ...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADA Standards] 502.6 Identification....
-
EVSE AutoWind EV (Electric Vehicle) Charger Single Pole, Dual Pole or Wall Mount
The cable management system is ADA and OSHA compliant by keeping cables off the ground when connected to a vehicle and when not connected....
-
Tools and Documentation
The following tools are needed for the 2016 Checklist: a metal tape measure at least 20 feet long a digital level or a bubble level that is at least 24 inches long a door pressure...
-
A5. Accessible Parking Spaces
Are all accessible parking spaces, including the access aisle, relatively level (1:50 or 2%) in all directions?...
-
803.5 Coat Hooks and Shelves
Shelves shall be 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
6.8.2 Grade and cross slope
Where the surface is paved or is elevated above the natural ground, the surface shall not be steeper than 1:48 (2 percent) in any direction....
-
BORA Classic Cooktop Extraction System
Product description 5 power levels Power level control via intelligent touch operation Lowest installation dimensions – even 600 mm deep work surfaces are possible...
-
§8.4(b)(2)
(2) For purposes of this part, housing, aids, benefits, and services, to be equally effective, are not required to produce the identical result or level of achievement for individuals with...
-
A1
Is a relatively level (1:50 or 2% maximum slope in all directions) access aisle provided adjacent and parallel to the side of the vehicle pull-up area?...
-
B5
Are all accessible parking spaces, including the access aisle, relatively level (1:50 or 2%) in all directions?...
-
602.3 Electronic Support Documentation
Documentation in electronic format, including Web-based self-service support, shall conform to all Level A and Level AA Success Criteria and all Conformance Requirements in WCAG 2.0 (incorporated...
-
8.2.3 Apparatus
Stimuli were delivered binaurally at a comfortable listening level. The level of the signal was the same for both ears....
-
11B-302.2 Carpet
Carpet or carpet tile shall have a level loop, textured loop, level cut pile, or level cut/uncut pile texture. Pile height shall be ½ inch (12.7 mm) maximum....
-
Provisions of the Final Rule
Further, section 37.169 states three grounds on which a transportation provider could deny a requested modification....
-
11B-405.7.5 Doorways
Where a door swings onto a ramp landing width, additional ramp landing length as specified may be necessary to accommodate a clear level area for the wheelchair user to clear the door swing...
-
2. General Framework of Assessment
Some of the main components of the Preliminary RIA’s methodology are as follows: Estimating the beneficiary population: To estimate the number of federal employees and members of the...
-
306.3.4 Clearance Reduction
Between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
306.3.4 Clearance Reduction
Between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
306.3.4 Clearance Reduction
Between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
4.3.5 Transfer Height
Tent platform surfaces that are not the same elevation as the ORAR shall be between 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the floor or ground surface adjacent to...
