A change in level of ½ inch (13 mm) is permitted to be ¼ inch (6.4 mm) vertical plus ¼ inch (6.4 mm) beveled....
Search Results "Permitted Transfer"
-
11B-303.3 Beveled
-
11B-1005.1 Accessible routes
Accessible routes serving floating fishing piers and platforms shall be permitted to use Exceptions 1, 2, 5, 6, 7 and 8 in Section 11B-1003.2.1 _|Boat Slips|_. 2....
-
§ 38.23(a) General
., lift or ramp) complying with paragraph (b) or (c) of this section and sufficient clearances to permit a wheelchair or other mobility aid user to reach a securement location....
-
907.5.2.3.3 Group R-2
Such capability shall be permitted to include the potential for future interconnection of the building fire alarm system with the unit smoke alarms, replacement of audible appliances with...
-
11B-304.3.2 T-Shaped space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm. ...
-
11B-304.3.2 T-Shaped space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm....
-
1.1.5 Referenced codes
The National Fire Codes, standards, and the Fire Protection Handbook of the National Fire Protection Association are permitted to be used as authoritative guides in determining recognized...
-
11B-813.2.1.2 Clearance
Changes in level are not permitted....
-
Alterations Affecting Primary Function Areas—Exception to Section 202.4 of the 2010 Standards
HUD is not permitting use of the Exception to Section 202.4 because this may conflict with HUD’s Section 504 regulation....
-
407.2.2.2 Visible Signals
Destination-oriented elevators shall be permitted to have signals visible from the floor area adjacent to the hoistway entrance. 2....
-
609.3 Spacing
EXCEPTION: The space between the grab bars and shower controls, shower fittings, and other grab bars above shall be permitted to be 1 1/2 inches (38 mm) minimum....
-
410.6 Doors and Gates
EXCEPTION: Platform lifts serving two landings maximum and having doors or gates on opposite sides shall be permitted to have self-closing manual doors or gates....
-
505.10 Handrail Extensions
In assembly areas, extensions shall not be required for ramp handrails in aisles serving seating where the handrails are discontinuous to provide access to seating and to permit crossovers...
-
804.3.1 Clear Floor or Ground Space
EXCEPTION: Cabinetry shall be permitted under the kitchen work surface provided that all of the following conditions are met: (a) the cabinetry can be removed without removal or replacement...
-
405.7 Landings
A level landing is needed at the accessible door to permit maneuvering and simultaneously door operation....
-
307.4 Vertical Clearance
EXCEPTION: Door closers and door stops shall be permitted to be 78 inches (1980 mm) minimum above the finish floor or ground. Figure 307.4 Vertical Clearance...
-
902.1 General
EXCEPTION: Dining surfaces and work surfaces for children’s use shall be permitted to comply with 902.4. Advisory 902.1 General....
-
5. Recommendations
These systems however, frequently require all patients to under some form of sedation prior to transfer....
-
Expert opinion on the current literature
Articles that both experts agreed were relevant to the performance of independent wheelchair transfers were selected for the next step of review....
-
9. Is the ADA limited to segregation in employment settings when the same individuals are also subject to segregation in other settings during the day, like facility-based day programs?
state could not cease referrals of individuals with disabilities to sheltered workshops while instead referring those individuals to facility-based day or other segregated day programs, or transferring...
-
NFPA: ADA Standard Section 105.2.5
Section 105.2.5 of the ADA Standards cover references to the National Fire Protection Association (NFPA).
-
Islands: ADA Standard Section 406.7
Section 406.7 covers the current ADA Standards for islands.
-
General: ADA Standard Section 222.1
Section 222.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dressing, fitting, and locker rooms.
-
11B-703.4.2 Location
In alterations where sign installation locations identified in Section 11B-703.4.2 are obstructed or otherwise unavailable for sign installation, signs with tactile characters shall be permitted...