The top of the fixture rim is a maximum height of 2'10" above the finished floor. If kneespace is provided below the vanity, the bottom of the apron is at least 2'3" above the floor....
Search Results "Maximum Reach Depth"
-
7(2)(b)(v)
-
11B-608.3.3 Alternate roll-in type shower compartments
Grab bars shall be installed 6 inches (152 mm) maximum from adjacent walls. FIGURE 11B-608.3.3 GRAB BARS FOR ALTERNATE ROLL-IN TYPE SHOWERS...
-
10.3.1(4)
Such signs shall be placed in uniform locations at entrances within the transit system to the maximum extent practicable....
-
703.2.5 Character Height
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter "I"....
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
Dimensional Tolerances [3.2]
Recommendation: It is good practice to avoid specifying precisely to the maximum or minimum where possible so that achieved dimensions fall within ADAAG requirements....
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
1.1.2 Walks
This includes surfaces with a maximum slope of 1:20 (5%), such as a walk, parking area, or a portion of a driveway that is also used for a walking surface....
-
11B-407.4.8.2.1 Signal type
Exception: For elevators that have a rated speed of 200 feet per minute (1 m/s) or less, a non-verbal audible signal with a frequency of 1500 Hz maximum which sounds as the car passes or...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-407.4.8.2.1 Signal type
Exception: For elevators that have a rated speed of 200 feet per minute (1 m/s) or less, a non-verbal audible signal with a frequency of 1500 Hz maximum which sounds as the car passes or...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-813.2.10 Door swing
A door, in any position, shall be permitted to encroach into the turning space by 12 inches (305 mm) maximum....
-
Tork Image Design™ Matic® Hand Towel Roll Dispenser with Intuition® Sensor, Recessed
Product Data System - H11 Material - Metal/Plastic Height - 27 in Width - 18 in Depth - 8 in Color - Stainless...
-
Wikk Industries Inc. Push Plate Narrow Switches
Responsive Easy to Install Cover Plate is Type 304 Stainless Steel in Brushed Satin Finish US32D (630) Single Pole Double Throw (S.P.D.T.) momentary switch has 3/4” (19mm) mounting depth...
-
American Safety Tread Co., Inc. Style Narrow Width Elevator Sill
Available in narrow width as well as full depth opening, cast anti-slip entrance sills are designed for every elevator....
-
Tork Foam Soap Dispenser – with Intuition® Sensor, Stainless Steel
Product Data System - S4 - Foam Soap System Material - Metal/Plastic Height - 11 in Width - 5 in Depth - 5 in Color - Stainless...
-
Bobrick Koala Kare Oval, Wall Mounted Baby Changing Station KB208
Unit Dimensions: 34” W x 21" H (864 mm x 533 mm) Depth (closed): 4” (102 mm) Extension (open): 21” (533 mm) Shipping Weight: 20 lbs Available in 3 colors...
-
C204.1 General (Section-by-Section Analysis)
Similarly, these types of products do not typically provide transactional outputs covered by proposed 409. 407.12 Reach Height and 408 Display Screens....
-
B. Question 2: Section 904.4.1 and Clear Counter Space
Section 904.2’s Advisory further directs that, when a cash register is set on a sales or service counter, it should be located where people with disabilities can reach the cash register...
-
DEFENDANTS’ RAISED PORCHES
From atop the raised porches, the interior of the store is reached by proceeding through an opening without a door and descending two steps. See Order 3, ECF No. 109. ...
-
11B-405.2 Slope
Table 405.2 Maximum Ramp Slope and Rise for Existing Sites, Buildings, and Facilities Slope1 Maximum Rise Steeper than 1:10...
-
Grab Bar Cross Sections
Non-circular cross sections were to have maximum cross section dimensions of 2 inches, a perimeter dimension between 4 and 4‒11/16 inches, and edges with a c inch minimum radius....
-
5. Are there any tax credits or deductions to help me comply?
This credit can cover 50% of the eligible access expenditures in a year up to $10,250 (maximum credit of $5000)....
