The side edge of the seat shall be 1½ inches (38 mm) maximum from the adjacent wall. Figure 610.3.1 Rectangular Shower Seat...
Search Results "Hinge Side Clearance"
-
610.3.1 Rectangular Seats
-
11B-604.9.5 Flush controls
Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with Section 11B-604.8.2....
-
4.7.7 Water Spouts
Water spouts shall be located in the space so that the water spout is 11 inches (280 mm) minimum and 12 inches (305 mm) maximum from the rear center of the long side of the clear floor or...
-
Is color contrast required for stair nosings?
The ASME A17.1 code requires escalator steps to be demarcated by yellow lines 2” wide maximum along the back and sides....
-
11B-608.3.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry....
-
11B-602.3 Operable parts
The flow of water shall be activated by a manually operated system that is front mounted or side mounted and located within 6 inches (152 mm) of the front edge of the fountain or an automatic...
-
11B-608.5.1 Transfer type shower compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1219 mm...
-
11B-604.9.5 Flush controls
Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with Section 11B-604.8.2....
-
608.5.1 Transfer Type Shower Compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm...
-
802.1.3 Depth
Where a wheelchair space can be entered only from the side, the wheelchair space shall be 60 inches (1525 mm) deep minimum....
-
Gamco Surface-Mounted Sanitary Napkin Disposal - ND-1
Cover is drawn, one-piece construction; secured to cabinet with full-length stainless steel piano-hinge. Capacity: 1.0-gal. (3.8-L)....
-
Bobrick ClassicSeries Surface-Mounted Soap Dispenser B-2111
Hinged filler-top requires special key to open. Vandal-resistant. Unit 4 3⁄4" W, 8 1⁄8" H (120 x 205mm); wall to push-button, 3 1⁄2" (90mm)....
-
Bobrick ClassicSeries Surface-Mounted Soap Dispenser B-2112
Hinged filler-top requires special key to open. Vandalresistant. Unit 8 1⁄8" W, 4 3⁄4" H (205 x 120mm); wall to push-button, 3 1⁄2" (90mm)....
-
Bobrick Partition-Mounted Multi-Roll Toilet Tissue Dispenser (Serves 2 Compartments) B-386
Mounts centered through toilet partitions, 1/2–2" (12–50mm) thick; used from both sides. Holds four standard core toilet tissue rolls up to 5 1/8" (130mm) diameter; two for each side....
-
California: Toilet Grab Bars - Uneven height allowed?
I noticed that the specific code language suggests that the side grab bar and the rear grab bar must be at the same height (California CBC text is slightly different than ADAS), but it reads...
-
Rulemaking Authority
They’re going to look at the knee and toe clearances that our guidelines establish in order to determine whether or not the table is generally useable to individuals who use wheelchairs....
-
Imagining "Slope 2 Tycoon" – A Store Management Game Where Speed is Your Currency
Your retail empire hinges on your ability to keep that ball rolling smoothly and swiftly. Strategic Runs: Don't just play Slope 2 aimlessly....
-
11B-404.2.3 Clear width
Exceptions: In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop....
-
11B-404.2.3 Clear width
Exceptions: In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop....
-
Clear Width: ADA Standard Section 404.2.3
Section 404.2.3 covers the current ADA Standards for clear width at manual doors, doorways and manual gates that are part of an accessible route.
-
11B-809.10.6.1 Size
11B-809.10.6.1 or; A shower stall 36 inches (914 mm) deep by 60 inches (1524 mm) wide minimum with an entrance 36 inches (914 mm) minimum when a wall is installed on the opening side...
-
AJW Architectural Products U374 Paper Cup Dispenser - Surface Mounted
Fabricated of #22 gauge stainless steel with a #4 satin finish Dispenser holds 150 3 oz cups Secured with pin tumbler lock, keyed like all AJW cabinets Made with heavy duty piano type hinges...
-
Section 37.9 Standards for Transportation Facilities
One further clarification concerning the implication of this provision deals with a bus loading island at which buses pull up on both sides of the island....
-
404 Doors, Doorways, and Gates
operated doors: clarify coverage of gates and the application of this section to manual doors and doorways intended for user passage (404.2) clarify and modify maneuvering clearance...
