Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
Search Results "Design Guideline"
Filters
Commonly Searched Documents
-
11B-1002.4.4.2 Side entry
-
411.1 General (Section-by-Section Analysis)
This proposal largely corresponds to existing 508 Standards §§ 1194.23(j) and 1194.24(a), and existing 255 Guidelines § 1193.37, though it differs in a few notable respects....
-
Definition of "Dwelling Unit" and "Transient Lodging"
The guidelines now use the term "residential dwelling unit," which is defined as "a unit intended to be used as a residence, that is primarily long-term in nature."...
-
Resources
Let’s Put the Person First, Not the Disability, Kathie Snow, 2013 http://www.disabilityisnatural.com/explore/people-first-language Guidelines: How to Write and Report About People...
-
Section 35.151(d) Scope of Coverage (Section-by-Section Analysis)
made to address concerns expressed by commenters who mistakenly believed that the advisory notes in the 2004 ADAAG established requirements beyond those established in the text of the guidelines...
-
E. Chapter 4: Boarding and Alighting
Chapter 4 in the 2016 Non-Rail Vehicle Guidelines, which sets forth the technical requirements for ramps and bridgeplates, accessible means of level boarding and alighting, lifts, and steps...
-
E102.7 ITU-T (Section-by-Section Analysis)
This proposed standard is new to the 508 Standards (as well as the 255 Guidelines), though it reflects current industry practice....
-
www.hrblock.com and "the website"
Unless otherwise provided in this Decree, technical terms used in this Decree have the same meaning as provided in the Web Content Accessibility Guidelines (“WCAG”) 2.0 (Dec. 11, 2008),...
-
R404 Clear Spaces (Section-by-Section Analysis)
This requirement differs from the 2004 ADA and ABA Accessibility Guidelines which does not permit slopes steeper than 2 percent at clear spaces....
-
Height
Midmark Corporation on examination table side rails, and the maximum height is generally consistent with the height of grab bars above shower seats in the 2004 ADA and ABA Accessibility Guidelines...
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
1009.2.8 Submerged Depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Submerged Depth
Submerged Depth Lifts must be designed so that the seat will submerge to a minimum of 18 inches below the stationary water level....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
§27.13(b)(1)
(1) The process for filing a complaint, including the name, address, telephone number, and email address of the employee designated under paragraph (a) of this section, must be sufficiently...
-
Wheelchair
Wheelchair means a device designed solely for use by an individual with a mobility impairment for the primary purpose of locomotion in typical indoor and outdoor pedestrian areas. ...
-
§ 35.104 Wheelchair
Wheelchair means a device designed solely for use by an individual with a mobility impairment for the primary purpose of locomotion in typical indoor and outdoor pedestrian areas. ...
-
Section 2. Adaptable dwelling units
"Adaptable dwelling units", when used with respect to covered multifamily dwellings, means dwelling units that include the features of adaptable design specified in 24 CFR 100.205(c)(2)-...
-
§ 37.3 Wheelchair
Wheelchair means a mobility aid belonging to any class of three- or more-wheeled devices, usable indoors, designed or modified for and used by individuals with mobility impairments, whether...
-
§35.171(a)(1)(ii)
(ii) If the agency does not have section 504 jurisdiction, it shall promptly determine whether it is the designated agency under subpart G of this part responsible for complaints filed against...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
12141(3) Fixed route system
(3) Fixed route system The term "fixed route system" means a system of providing designated public transportation on which a vehicle is operated along a prescribed route according to...
-
243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with 1010....