Exception: Braille provided on elevator car controls shall be separated 3/16 inch (4.8 mm) minimum and shall be located directly below the corresponding raised characters or symbols....
Search Results "Altered Elevator"
-
11B-703.3.2 Position
-
§ 35.151(b)(4)(v)(A)
(A) The obligation to provide an accessible path of travel may not be evaded by performing a series of small alterations to the area served by a single path of travel if those alterations...
-
Amusement rides. (Section-by-Section Analysis)
The amusement ride provisions do not provide a "triggering event'' for new construction or alteration of an amusement ride....
-
Sec.36.403(h)(1)
(1) The obligation to provide an accessible path of travel may not be evaded by performing a series of small alterations to the area served by a single path of travel if those alterations...
-
2. Executive Summary
Executive Summary The ADA prohibits discrimination on the basis of disability.5 The ADA requires facilities constructed or altered by state and local governments, and public accommodations...
-
11B-407.2.3 Hoistway signs
Signs at elevator hoistways shall comply with Section 11B-407.2.3....
-
11B-407.2.3 Hoistway signs
Signs at elevator hoistways shall comply with Section 11B-407.2.3....
-
11B-407.2.3 Hoistway signs
Signs at elevator hoistways shall comply with Section 11B-407.2.3....
-
Garaventa Elvoron CPL Vertical Platform Lift
It looks and feels like a small elevator but costs much less. The Elvoron CPL is designed to provide access for people with disabilities in commercial buildings....
-
Bobrick Vandal-Resistant Hook Strip B-985 Elevations
Requires the Premium User plan or above. (Login or upgrade your account!) -
§ 37.43(g)
(g) If a public entity performs a series of small alterations to the area served by a single path of travel rather than making the alterations as part of a single undertaking, it shall nonetheless...
-
11B-203.9 Employee workstations
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the...
-
11B-203.9 Employee workstations
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the...
-
Berm
Berm - A sloped surface at ground level designed to ascend or descend in elevation....
-
4.1.2(4)
(4) Stairs connecting levels that are not connected by an elevator shall comply with 4.9....
-
407.2.3 Hoistway Signs
Signs at elevator hoistways shall comply with 407.2.3....
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
-
CURB CUT
An interruption of a curb at a pedestrian way, which separates surfaces that are substantially at the same elevation....
-
CURB CUT
An interruption of a curb at a pedestrian way, which separates surfaces that are substantially at the same elevation....
-
§ 36.304(d)(3) Reduced scoping for public accommodations
For measures taken to comply with the barrier removal requirements of this section, existing facilities shall comply with the applicable requirements for alterations in § 36.402 and §§ 36.404...
-
Number of Accessible Telephones
Commenters expressed concern that the replacement of telephones would trigger more extensive alterations, such as a requirement to lower a telephone installed at 54 inches (currently permitted...
-
232.2.1 Cells with Mobility Features
Alterations to detention and correctional facilities....
-
§ 36.406(a)(5)(ii)
(ii) Newly constructed or altered facilities or elements covered by §§ 36.401 or 36.402 that were constructed or altered before March 15, 2012 and that do not comply with the 1991 Standards...
